Thought this would be a fun list. Stuff you could make for your wife, sister, brother, brother-in-law, boss, friend or family member. Not to complex, but fun, perhaps adding a link to etc. Repeats, adding new links etc are ok etc. For all real woodworkers ! It’s time to start cranking out some gifts …. #1 blanket chest ....link ... #2 corncob holders … link ... 3 picture frame 4 paddy wacks #
I managed to squeeze in a workshop update before the Thanksgiving holiday. Happy Thanksgiving, and enjoy!
After completing the Segmented Vessel, I decided I’d make the segments on my next piece a little thinner than the 3/4” previously used. Since we are all in the Christmas spirit, I thought I’d make a new ornament for our tree this year. The segments in this piece are 1/4” thick, and this piece includes a total of 92 segments. Here’s the before picture of the ornament blank glued up on the lathe. After turning, sanding and the first coat of wipeon polyurethan...
After a somewhat bumpy road of construction and design, I have finished my Christmas box. I say the road was ‘bumpy’ because there were a few issues that I had in both the design and the execution of creating this box. I can however say that I have ironed out all of those bumps and recreating this pieces should be very easy for those who wish to do so. I am happy with the results. Those of you who read saw that my first attempt of cutting the lid design included the misspel...
Decided to come up with a way of displaying greeting cards this year, rather than taping them to the wall. Here's a PDF if you'd like a few templates to cut out.
Holy cow! Christmas is only a month away. Have you started making gifts? Here’s a little decorative swing that holds a couple of flower pots. I had the most fun making the little ladybug that sits on the swing. Unleash your inner artist: it’s the unexpected details that make a mundane project soar.
How to: Chip carving - 2013 Christmas ornament Marty LeenhoutsMy Chip Carving866-444-6996
I’ll let the pictures do the talking. Two sided tape to hold the sides together for cutting. Sides stuck together and marked for cutting. Front part of the box cut from the sides. I used the BS as it removed the lease amount of material. Back laid in place. Sides and back attached. Front of the box assembled. Test fitting the front. 3/4” brass hinges & most of the pieces for the drawers.
I have put together a collection of my past projects that are relativity fast and simple to make. They make great gifts. Time to go out to the shop and make some sawdust! Any other good ideas!
Today is one of my favorite days of the year. Those of you who read know that I frequently wish that my days had more hours in them, and today is the one day of the year that my wish actually comes true. A 25 hour day! Now how I am going to use that extra hour is hard to decide. There are so many wonderful directions that I am heading in right now that I could choose from a variety of tasks. Yesterday was a very productive and happy day for me. All week I was working on a new ornament ...
- My Journey As A Creative Designer - Woodworking and Beyond - 1726 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 98 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Life as an Amateur Woodworker - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1751 entries
- frank - 417 entries
- dbhost - 410 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 301 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 237 entries
- Betsy - 228 entries
- stefang - 213 entries
- Stevinmarin - 212 entries
- robscastle - 207 entries
- Todd A. Clippinger - 207 entries
- Dave Rutan - 205 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 193 entries
- Rustic - 190 entries