I’m starting a very exciting project. Anything new that I try is exciting for me. I love new things and new techniques. I build a lot of murphy beds, as you can see from my post, but when I got customer wanting to add a whale design to one, I was all in. I don’t consider myself an artist or my work art, so this would be my first attempt at something like that. I’ve heard and read a little on marquetry and decided this would be the direction I’d take the customer....
Okay, I got approval form the customer and time to get started on the project. To pattern it I enlisted the services from a local sign company. They printed it up with the colors separated life size (life size to the bed not life size in the wild). They made me some mask to use as the pattern. Here is also the wood I choose to use. They are Quarter Sawn Walnut (dark color) and Lacewood (reddish color): These were masks so I was able to stick them to the veneer pieces. I cut them out...
I thought I’d post something for each day of the week. Thursday’s will be Technique Thursday. I’ll tell about some sort of technique that I use in woodworking. Templates: Can’t stress how important templates are. I’ll build them from 1/2” material to form the shape of a cut out. I always use a mechanical means of making a straight cut or a perfect arc (fence, straight edge, compass). It will then be used to trace onto the good piece, rough cut with...
French Fry Friday is when I put a focus on those smaller accessories. This week I’m turning my attention to some small legs that I added to a recent murphy bed. I’ll write about the bed at a later day seeing that I’m about a month behind on posting projects, but I wanted to show off it’s legs. This project was one that was going to a bed and breakfast. They planned on using the bed in the down position and keeping it that way until the space was needed for an event. The then would rais...
I have the design, cut the veneer pieces and now it is time to put it on the face. I tossed around ideas on how I’d put it on the face. My first idea was to order a large sheet of maple veneer (background wood). Cut the whale into the it like I did the rest and then glue it all onto a substrate panel. What I ended up doing was using 3/4” maple plywood as the substrate and cut in the design. First I outlined the whale. I then went around the border with a chisel. This allo...
People often ask me about my finishes and I am always wondering about how others do their finish too. I feel the finish is the key to any furniture. A bad finish can destroy the look and the value of a piece. I thought I’d share what I do and what material and equipment I use. As in equipment, I use an air assisted airless. It takes the best of both worlds. Low air volume but without using too high of pressure as in the airless rigs. It works like an airless, which I used for ...
Again I had different routes that I could have taken on the glue to use. I decided to go with regular yellow glue. It is more forgiving. If I would have laid the face down in one piece instead of an inlay, I may have used contact cement. Since the whales were fairly small I felt the yellow glue would work fine. I needed even and constent pressure on the entire piece. What I did was laid it down in this order. 2×4’s, substrate, glue, whale, wax paper, foam pad, plywood, 2...
I was posting a project this morning and realize that I was at 1000 post in 1600 days. WOW! It doesn’t seem like I’ve been here a LJ’s that long. Along with that I have 261 projects here. It is great to be able to go back and remember the building experience because of the write-ups. I sometimes even refer back to one on other builds so I don’t have to reinvent the wheel. This is a great site with great people. I’ve leaned a lot from professionals to t...
Okay, I haven’t posted a French Fry Friday post in a while. This is where I talk about those small things or accessories that normally get overlooked in my project post. This week I am taking a look at file drawers. There are several ways to accomplish this task. The most popular way is to use a rack system. Just make sure you leave enough room for it to slid in there. Rockler has a slip on system, where is very cool and easy too. With it being plastic I bet the hanging file fo...
Some associate veneers as being low quality and if you truly want quality go all solid. Really the opposite could be true. Veneers got a bad rap around the 60’s when cheap furniture was introduced into the market. There was delaminating, which is the lifting of the veneer, because of a bad process and gules. What is veneer? Veneer is a thinly sliced piece of wood glued onto a substrate or a another, usually manufactured, wood like MDF or plywood. With today’s technology these slices ca...
- My Journey As A Creative Designer - Woodworking and Beyond - 1742 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 107 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 79 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1767 entries
- dbhost - 420 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 304 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 246 entries
- Betsy - 228 entries
- stefang - 220 entries
- robscastle - 218 entries
- Dave Rutan - 214 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 194 entries
- A Slice of Wood Workshop - 190 entries