Hello Everbody, I’m brand new to wood working and new to lumberjocks and so far everybody on here has been wonderful and welcoming and I just have a quick question. I’m planning on buying my first set of chisels and I’m thinking about an Irwin 4-piece chisel set. I’ve read many reviews about Irwin Marples Blue Chip chisels but non about this set of Irwin Marple chisels. Are these good chisels? Heres a link: http://www.homedepot.com/h_d1/N-5yc1vZ1xkk/R-10008965...
Hello, My Lie-Nielsen 3/4” chisel and the fishtail, named Manfred and Donna respectively, did a great job today. We had lots of fun, despite me making one slight stratigic blunder. http://su.pr/3Y9evq Thanks, Brian
Wood and I….Sculpture ….while walking down the isles of life’s design,i was roiled enough to loose my way on a walk-about,the forest and trees no-longer fed this hunger within,and for days becoming years my dreams died as inaesthetic…. ….that was in-deed the hole i dug until i had no-strength dig deeper,what came next was confronting my dragon and refusing his lies any-more,so i went back to the woods fearing to hope and believe what i might find,what i found was that ...
Good Morning, my name is David Craig and I am a former sharpaphobiac transformed into a sharpaholic… The art of sharpening has been very intimidating to me and it has really caused a bit of a road block to my work. No matter how many power tools you have in your collection, woodworking will ultimately lead you to a point where a chisel is in your hand and it needs to be sharp. I fiddled around with the grinder some, have purchased sharpening stones at the store, but I was really out ...
Lately I’ve really been getting into hand tools. I asked for a few Japanese chisels for Christmas (one each from a few different people in the family.) I ended up with a set of four from Woodcraft. I decided that this collection was worthy of family heirloom status so I had them laser engraved and built a box to keep them in. I have always had a fascination with Japanese culture, art and woodworking. Lately I have been reading Japanese Woodworking Tools, Their Tradition, Spir...
I want to apologize if my blog has been the most depressing so far. This week my wife lost her grandmother. If you have been following my posts this past year, we have seen a lot of loss in friends and family. She is in a better place, which in and of itself is a relief. On to some good news. I have spent the past 6 months working on a project for a friend of mine. His office was due for some major updates to it’s network and server. This project has taken a lot out of me, both ...
Well folks a little more progress slowly coming into form on the maple handle design. Once more continuing to go about my shop efforts in a relaxed yet challenging pace. Shorter creative bursts giving forth an hour here or even a half hour there. I seem to leave the shop more satisfied knowing a more quality effort is being put into it all. The learning is actually becoming more than the old 3 hours straight and making various things with a mind almost in total fast forward mode with tools...
For all the pictures, please click here. Note: This was supposed to have been posted Saturday the 25th… I wasn’t sure how much time I’d have today to work on the bench so instead of charging ahead with measuring the height of the legs to get ready for installing the top, I decided to do some more mundane tasks. They still are in general preparation for the top, but I just wasn’t planning on doing them first. Before I get going though, I had mentioned yestrday...
For the dramatic (or not so dramatic) before and after pictures, please click here. A busy weekend with the kiddos and my wife happily trumped all other activities (except cutting the grass) for the weekend. But today is Labor Day so…what better way to celebrate than by doing some labor!I had just enough time to squeeze in some work on the still unfinished bench today. It has been sitting, base assembled and dry, with the top merely resting in place now for 3 days. Time to get bac...
I decided to try my hand today at cleaning my great-grandfather Herbie's tools that my dad donated to the shop around Halloween. As you can see they’re pretty rusted and well used. The hammer is clearly missing a handle and the two chisels definitely need new handles (one is broken off in the cone, the other has it’s handle but that thing is so dry rotted it hardly weighs anything). After some research on the internet I found a couple home-remedy ideas (I don’t have t...
- My Journey As A Scroll Saw Pattern Designer - 1600 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 96 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1625 entries
- frank - 417 entries
- degoose - 397 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 279 entries
- William - 258 entries
- Betsy - 221 entries
- shipwright - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 198 entries
- Rustic - 188 entries
- BritBoxmaker - 187 entries
- Chris Davis - 183 entries
- Smitty_Cabinetshop - 176 entries