If you need supplies for class, I’ll be glad to send them to you.I’ll be posting the first session on Monday, March 7th, but you can always start anytime during the week. Order as many squares as you like. I’ll be providing plenty of patterns to choose from.Send an email to Marty@MyChipCarving.com to let me know what you need. Shipping is Priority Mail. Swiss cutting knife w/free sharpening $24.95 6” basswood square – $1.50 4” basswood square &...
The pattern is on your plate and your knife is sharp. That means it’s time to start carving!We’ll begin with the rosette. Have one or two practice boards ready so you can try some of these chips on your practice board before carving on your plate. Here’s the lesson: Next lesson: Carving the border
I’m wondering what you think about my adding some color to this chip carved plate. From the start I’d planned on adding a light, transparent, oil-based green color to the leaves and red to the berries.But now that I’ve gotten this far in the finishing process, I really like the way it looks and I’m chickening out when it comes to doing anything else to this chip carving.What do you think?
Lesson 1, Part 2 – How to sharpen your chip carving knife As a kid, did you ever grab that old hand saw hanging in your dad’s garage and try to cut a board with it?I know I did! No wonder my dad didn’t do any woodworking. I would’ve be better off taking karate lessons and breaking the board with my fist. A dull tool in the shop leads to burn marks, ratty edges, and wandering cuts. Not only that, but it requires a lot more force on your part which can lead to inju...
Lesson 3: Pattern Development The project we are tackling in this class is a chip carved quilt. Quilt patterns lend themselves very well to chip carving. Geometric in nature, various elements of a quilt pattern can be removed to create a carved version of the fabric quilt. If there is a quilter in your household, no doubt there will be a book, magazine, or quilting journal in the bookcase, magazine rack, or under the bed (maybe only in my house). Get one out and page through it thinking...
Lesson 4: Proper Technique Needed in this lesson: chip carving knife, basswood practice board, mechanical pencil, t-square We’ve all heard many times that “practice makes perfect”. But really this is faulty advice. It’s not “practice” that makes perfect, but rather, “perfect practice makes perfect”. This is very true when it comes to chip carving. Developing proper technique from the start will lead to good results in short order and a ...
Lesson 5: Chip Carving Square #1In this lesson you will apply what you learned in Lesson 4. This first quilt square is made up entirely of three corner chips. Here’s the pattern: Right-click on the image and select “Save Image As” and save it to your hard drive.I hope the pattern size will remain the same so you can transfer it directly to your square.If you need to resize the image, this can be done with a photo editor or in Word after inserting the picture. Practi...
The last steps to complete our plate is to apply a finish.The finishing process gives many carvers headaches and can lead to much frustration.With this in mind, I’ve created a series of finishing lessons in the My Chip Carving Video Vault.I won’t create a full-blown finishing video for this class but instead will encourage you to check out the finishing series already created. Here are the steps to finish your plate. 1. Remove all leftover pattern lines. The following video ...
- My Journey As A Creative Designer - Woodworking and Beyond - 1792 parts
- Extremely Average - 324 parts
- Toy costruction - 115 parts
- A journey into the workshop. - 110 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Daily Update - 87 parts
- Woodworking on a Half-Shoestring - 82 parts
- Life as an Amateur Woodworker - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Sheila Landry (scrollgirl) - 1817 entries
- dbhost - 436 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- mafe - 313 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 241 entries
- Dave Rutan - 231 entries
- Betsy - 228 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- A Slice of Wood Workshop - 210 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 195 entries