With the front of the wine bottle holder carved, we’re ready to layout the pattern on the edge.If you have a Flat Lying Trammel Set, get it out now as you will find it very handy in this part of our project. In our next lesson we will carve the edge and apply a finish!
So, how did your 6-point rosettes turn out? In this lesson we will carve the background that surrounds the rosettes you just carved.If your knife needs touching up, do it now using a flat leather strop or white ceramic stone.Enjoy this lesson and let me know if you have any questions. In the next lesson we’ll lay out the pattern on the edge.Stay tuned!
Lesson 2 – Carving the 6-point rosettes With the layout of our pattern complete (see Lesson 1), we’re ready to start carving. Before making the first cut, it is important to make sure your knife is razor sharp. CLICK HERE to review the lesson on sharpening. Now we’re all set to carve the overlapping rosettes on the front of our wine bottle holder. Enjoy the lesson and good luck with your carving! If you have any questions, don’t hesitate to ask. More chip ca...
To wet your appetite for what’s ahead, here’s a picture of what we’ll be carving in this class. Martywww.MyChipCarving.com866-444-6996
I hope you give this project a try. It’s not too complicated and won’t take long to complete. Let me know how it turns out for you!
This looks like a fun project. The idea is from American Woodworker. To make it more chip carve-able, I was thinking about not drilling the large holes in all the squares and then chip carving those surfaces. That along with the cut off corners would make a really cool piece. What do you think? Step-by-step instructions are found here – http://americanwoodworker.com/blogs/projects/archive/2012/01/03/ws-wiffle-ball.aspx?utm_source=AWNL&utm_medium=email&utm_campaign=AWNL...
The last steps to complete our plate is to apply a finish.The finishing process gives many carvers headaches and can lead to much frustration.With this in mind, I’ve created a series of finishing lessons in the My Chip Carving Video Vault.I won’t create a full-blown finishing video for this class but instead will encourage you to check out the finishing series already created. Here are the steps to finish your plate. 1. Remove all leftover pattern lines. The following video ...
- My Journey As A Scroll Saw Pattern Designer - 1433 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 93 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- Sheila Landry (scrollgirl) - 1457 entries
- frank - 417 entries
- degoose - 394 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- mafe - 232 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 197 entries
- shipwright - 193 entries
- Rustic - 186 entries
- Chris Davis - 183 entries
- stefang - 182 entries
- BritBoxmaker - 169 entries
- PurpLev - 163 entries