Lesson 5: Chip Carving Square #1In this lesson you will apply what you learned in Lesson 4. This first quilt square is made up entirely of three corner chips. Here’s the pattern: Right-click on the image and select “Save Image As” and save it to your hard drive.I hope the pattern size will remain the same so you can transfer it directly to your square.If you need to resize the image, this can be done with a photo editor or in Word after inserting the picture. Practi...
If you need supplies for class, I’ll be glad to send them to you.I’ll be posting the first session on Monday, March 7th, but you can always start anytime during the week. Order as many squares as you like. I’ll be providing plenty of patterns to choose from.Send an email to Marty@MyChipCarving.com to let me know what you need. Shipping is Priority Mail. Swiss cutting knife w/free sharpening $24.95 6” basswood square – $1.50 4” basswood square &...
This class is new territory for me and for LumberJocks. To help me pace the lessons properly, please reply to this posting with one of the following: REWIND – slow down, I need to look at Lesson 1 PAUSE - give me a day or two and I”ll be ready for the next lesson PLAY – I’m ready for the next lesson FAST FORWARD – crank it up! I’m ready and rarin’ to go! Marty LeenhoutsMy Chip Carving866-444-6996
Lesson 4: Proper Technique Needed in this lesson: chip carving knife, basswood practice board, mechanical pencil, t-square We’ve all heard many times that “practice makes perfect”. But really this is faulty advice. It’s not “practice” that makes perfect, but rather, “perfect practice makes perfect”. This is very true when it comes to chip carving. Developing proper technique from the start will lead to good results in short order and a ...
I’m wondering what you think about my adding some color to this chip carved plate. From the start I’d planned on adding a light, transparent, oil-based green color to the leaves and red to the berries.But now that I’ve gotten this far in the finishing process, I really like the way it looks and I’m chickening out when it comes to doing anything else to this chip carving.What do you think?
Applying a finish to your completed chip carving is a “make or break” step. Do it well and your chip carving comes to life and is something wonderful to behold. Do it poorly and your carving loses the beauty and the finish detracts from the chip carved design. Follow this lesson closely from start to finish and you’ll find success with each chip carving you complete from here on out. I call this the My Chip Carving Quick & Easy Finish Step 1 – Remove leftover...
I know that drawing and working on patterns is not enjoyable for many chip carvers. With that in mind, we will start carving tomorrow. I’d still like to encourage many of you to give pattern development a try.I’ll provide some patterns for you to carve. Adding your patterns to the mix will give our finished project more variety. Also, there’s a great sense of satisfaction knowing that the pattern you are carving is one that you came up with on your own. Here’s an...
The pattern is on your plate and your knife is sharp. That means it’s time to start carving!We’ll begin with the rosette. Have one or two practice boards ready so you can try some of these chips on your practice board before carving on your plate. Here’s the lesson: Next lesson: Carving the border
I’ve created 9 – 3-3/4” patterns and 6 – 5-3/4” patterns that you can pick from to chip carve. Creating your own patterns is encouraged too. Here’s a glimpse of one page of the 3-3/4” patterns. The easiest way I could come up with for you to be able to download these quilt square patterns I’ve prepared, is to post them in the My Chip Carving Member area. If you are already a member – log in and go to the Pattern Vault and look...
This classic box is for a friend’s son, when he turns 13. My next step is to spray on an amber shellac finish.
- My Journey As A Creative Designer - Woodworking and Beyond - 1768 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 109 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- Toy costruction - 93 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 80 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- Sheila Landry (scrollgirl) - 1793 entries
- dbhost - 430 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 304 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 254 entries
- Betsy - 228 entries
- robscastle - 226 entries
- stefang - 221 entries
- Dave Rutan - 219 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- A Slice of Wood Workshop - 199 entries
- Smitty_Cabinetshop - 195 entries