hello all.. Now, having got the parts of the basic structure ready I wanted to get this glued up solid before fitting the parts that form the drawer pocket so I needed to get the legs shaped. Apart from the use of the Cocobolo panels the legs were the only other part I was fairly certain of once I knew this would be a table. I had seen some legs I liked and which seemed like they would fit here. I had a photo of the piece that sported those legs and imported it into sketchup. I used th...
I had to chamfer some small frame pieces but didn’t want to simply hold the pieces in my hand and run a block plane over them. Since I don’t have a chamfering plane I had to improvise. Thanks for your time.
I came across this today and thought I would share. I don’t know anything about the plane; I do know it looks really cool though and thought some folks might agree. Appears the maker is a David Irwin (no association with Irwin tools I would imagine), and it’s stamped with a Swann-Morton logo, who appear to make surgical instruments. . . . . . . . .
I’m SO new to woodworking that nearly EVERY project has me back at the bottom of some learning curve or another. I rarely get to fall back on skills that I’ve learned well, used often, and perfected. And … when I leave glitches in my projects, making ME think I earned a grade of “B+” or “A-,” I always wonder …. What if I did that project again. Would I get an “A?” So …. I’m making my wife a box, based on the ...
It’s been months since I’ve been able to do any woodworking. I guess being busy in this economy is a good thing. I finally got a couple of days in the shop to address in-progress projects. The biggest was my mental block on the 4-sided quartersawn legs for the dining table. In a previous entry, I discussed how I botched the lock miter joint. It took me a while to get up the nerve to get back to work on them because if I biffed it again, they’d be too thin and I’d ...
I started by marking out all the cut lines with a marking gauge. I have one of those simple wood pass through another wood with a thumb screw and a little pin, ones… so….I chiseled out the sections in the maple down to the lines after cutting the shoulders with the dovetail saw. I then transfered the tenons to the backside of the zebrawood with the marking gauge again. Then chiseled around the marks and worked on taking out the material with the chisels. A mortiser would be really...
The ContestMy woodshop proram at Cerritos Community College is having a contest/exhibition/barbecue… I have till Friday night to finish my entries for Beginning Cabinetmaking and Furnituremaking. So Far from the FinishSo yesterday I continued the mammoth job of finishing the carcases with three coats of Wipe-On Poly along with the insides of five drawers. I got two coats on and am about to go back to do the final coat. Here is one pile.. And the other… Luckily we h...
- My Journey As A Creative Designer - Woodworking and Beyond - 1742 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 105 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 79 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1767 entries
- dbhost - 418 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 304 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 246 entries
- Betsy - 228 entries
- stefang - 220 entries
- robscastle - 218 entries
- Dave Rutan - 213 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 193 entries
- A Slice of Wood Workshop - 190 entries