586 days ago
by William Leslie |
4 comments »
What an exciting opportunity to design a project with the potential to have it published! I’ve always been interested in getting my work published and exercising my writing skills at the same time. When this contest presented itself I vowed to make sure that I submitted an entry and am just making it in under the wire. I hope that everyone enjoys my submission and as always will appreciate the comments of the lumberjocks community.
Sketchup File
Beginnings of my ArticleWhen I set...
Read this entry »
586 days ago
by Ingemar |
4 comments »
When I first read about this challenge I thought it would be a good reason to finally try to learn SketchUp. I find bookcases as boring as anything as a design study. A quick look at one of my favorite design sites revealed that at www.danish-furniture.com there where no bookcases at all. Not even a small one. It isn’t difficult to understand why. A bookcase is nothing but a collection of shelves connected by some kind of structure. Plain or ornate. The more ornate, the less efficient i...
Read this entry »
586 days ago
by Alin Dobra |
7 comments »
The design of this entry in the Challenge04 contest is based on a bookshelf I build for my son ( you can see the project here: http://lumberjocks.com/projects/3968 )
This design and the actual bookshelf I build for my son try to address a number of things I do not like about most bookshelves I see in stores, the web, this site, etc.
1. Non Boxy I do not particularly (or at all) like bookshelves that are boxy. A completely enclosed bookshelf traps the items inside and makes them out of r...
Read this entry »
586 days ago
by Zipsss |
0 comments »
This bookcase I build for each of my kids when they went to college. The first one about 10 years ago. The purpose was to have something that will be flexible in space, easy to move from place to place and sturdy enough to hold books, stereo or a TV, and to last a few years. The supports are made of 3/4” white oak from left over wood floors. The frames are a basic stile and rail construction using pocket holes . This one is 48” high and there are 4 panels joined to each other with hinges. Whe...
Read this entry »
587 days ago
by Tim |
4 comments »
This is a shelf I finished last month for my sister. The size accommodates a corner beside the patio door. I left the back and sides open for showing off her fancy scrapbooks. I screwed it to the wall through the top rail.
It is all 3/4” solid mahogany from the home center. The shelves sit on adjustable pins. A 1” piece wraps three sides to give heft and cover the endgrain. I used glue at the front with splines at the rear for seasonal movement.
The rail...
Read this entry »
587 days ago
by FloridaNoCypress |
12 comments »
For some two years, I carried a rough outline of a case for my wife’s piano books in the back of my mind. Having been scared away by AutoCad’s threat to my credit card balance, and then frustrated with TurboCad’s coming-through-the-back-door work method, I decided to bite the bullet and try Sketchup. Otherwise, I’m back to my old CrayolaCAD.
Well, Sketchup was a little tricky at first, but I managed to fudge a little here and bump a little there, and finally with one cathartic brain fart, ...
Read this entry »
587 days ago
by leonmcd |
3 comments »
I’m very new to Sketchup and I’ve had more trouble than most learning how to do anything useful with it. Just in the last two days I made major progress. I’ll probably do a separate forum or blog post to discuss my trials and tribulations with SketchUp.
For the project, I wanted something light and airy. I think this bookcase has the lightness I wanted yet sturdy. The weight of the bookcase rests on a base so that there is no weight on the curved ends of the side rail...
Read this entry »
587 days ago
by Nathanp |
3 comments »
Hello all,
Found my way here from Popular Woodworking editor’s blog. Nice place you got here.
This is my entry for the Popular Woodworking bookcase contest. It is also my first Sketchup project. The shelf is the foundation of several variations I’d like to do (formal\classical, Asian). I’m still learning Sketchup, so I don’t know if I’ll be able to get pictures of those up before the deadline.
A couple of pictures:
And here's a link to the ...
Read this entry »
587 days ago
by shiney5757 |
5 comments »
This bookcase had to be designed for a Church, and be movable. It also had to fit comfortably against the back of pews when been stored.I used European white oak which i quarter sawed myself,the shelves sit 90 degrees to the face edge.I made hold down blocks for the top, any screws used were solid brass SH and facing to heaven!The bookcase is movable on castors.Coated with sanding sealer and finished with about 8 – 10 coats of clear wax.
Read this entry »
587 days ago
by ThreeJs |
2 comments »
I designed this simple proof of concept project for my house. My ultimate goal, (when I get the time, money, and tools) is to replace this:
My current shop would be hard pressed to complete even this first project, but I think we will get there eventually.
So here is the concept shelf.
It is a wall hanging model, that when built will probably not go on the wall shown above, but will hang in the room, and hold some of our collections. I designed these shelves with Cherry and...
Read this entry »
1 2 3 4 5 6 7
62 entries
