The Roof on our Apartment building sustained a little damage this past Winter. After the snow melted, I found the remains of two Slate shingles, out of the hundreds that are up there… The one in the front didn’t survive the fall, but the one in the back put me of a mind to make something, if I can only square it up a little…Back in my landscaping days, in the late “70’s, we cut tons of Granite for Walkways and Stairs. It’s a lot of work, but relatively e...
Good week for struggles and not-quite-there-yets in the woodshop this week. Three projects left the floor complete. The first, chalkboard that has been wind-blown, vandalized and otherwise destroyed three times. We’ll see if it sticks this time. Here’s the link to the photo- for some reason the picture loader isn’t working…. The other two projects I failed to take a picture of. On Mon or Tues, I’ll put up a picture of those two projects. spent a majority of my t...
Ok so this is a quick glance at how my (and sometimes my wife’s mind works)... We were looking at the clearance halloween merchandise and I bought a countdown timer to use next year. When we got home we were talking about the timer and if there might be other uses for it. We are taking a vacation in the upcoming months and thought it would be cool if we could count down for it to help get our daughter excited. Decided to make a new timer using the halloween one. But kept talking ...
This weekend my family went with a fellow church member to a sister congregation located among one of the minority indigenous communities. Our purpose was to provide them with a couple chalkboards – one for the sanctuary and one for the Sunday school room. I brought all the tools and the chalkboard paint, and our friend arranged for the plywood to be delivered. The first step was to cut the sheets down a bit. I didn’t have enough paint for two 4×8 sheets, so I cut them bot...
I decided that I was going to finish the table yesterday. As I eluded to in my shop tour, the top is slate, specifically a piece of an old school chalkboard. (I have 4 or 5 large pieces courtesy of my grandfather). Months ago I hung up a 2x3 (ish) piece in the kitchen with a couple screws, it drilled really easy and cleanly. I expected to be able to cut this with my jigsaw, but I meant to pick up (or look for) something else - just in case, when I was out getting a few things at the Bi...
- My Journey As A Scroll Saw Pattern Designer - 1695 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- A journey into the workshop. - 92 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Life as an Amateur Woodworker - 69 parts
- Sheila Landry (scrollgirl) - 1720 entries
- frank - 417 entries
- dbhost - 403 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 287 entries
- William - 258 entries
- shipwright - 232 entries
- Betsy - 228 entries
- Stevinmarin - 212 entries
- stefang - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 204 entries
- robscastle - 196 entries
- Smitty_Cabinetshop - 191 entries
- Dave Rutan - 191 entries
- Rustic - 190 entries