407 days ago
by Dorje |
24 comments »
Here’s a little more ‘milling around’ for fun:........
This board turned out to have some really interesting spalting…........
And, upon closer examination:...........
One with our stacks:........
And our final parting shot! ........
This concludes the milling process. What a blessing it was to have Mike’s support in this process. I can thank LJ for that! And a HUGE thanks to Mike directly! That was a lot of fun last Wednesday. Just amazing what can come f...
Read this entry »
412 days ago
by Dorje |
15 comments »
On the same cold, crisp, gorgeous day in Sunny Seattle…the next thing we did was mount a 2×12x12 to the top of the 1st half of the maple log as a guide board to establish our first flat face from which we could continue to cut with just the chainsaw mill. The 2×12 had 2×2 runners screwed on to it to keep it flat and a wee bit more ridgid. One hooked over the edge, while the other was inset a few inches to “shim” the board to “level” it out (all ...
Read this entry »
411 days ago
by Dorje |
23 comments »
After the slabbing cut, we continued to cut the first half of the log. Here’s a short video of Mike on the saw…....
....
After a few cuts we hit a nail…pulled the saw out and cut from the other end…chipped a tooth but nothing really terrible; the chain was still relatively sharp, so we continued to cut!............
Here’s the spalting a bit closer up…it gets even better in the 2nd half!.......
....
A bookmatch shot for fun…........
MORE TO COME!....
Read this entry »
409 days ago
by Dorje |
15 comments »
At the end of this short video you’ll see me look up at Mike. If you listen closely you can hear the saw hit some more metal…....
....
At some point after the next few cuts we hit our 3rd and 4th nails within the same board:........
But, look what we have here!........
Here’s a shot of the “scene” at this point (there’s a few board feet of sawdust):........
We’ll finish up the sawing in the next installment…We uncovered a real gem just a bit ...
Read this entry »
400 days ago
by Dorje |
21 comments »
Last step in the process (well not the last – but close to it – still have to get back over there and paint, or otherwise seal the endgrain, which hasn’t done much in the way of checking with all the freezing temps and the moisture we’ve been getting)
...I set up a level ‘foundation’ for the lumber stack. Made sure it was up off the ground and spaced the beams just under 2ft apart:.........Here’s a couple shots of the progress. My wife helped me h...
Read this entry »
154 days ago
by Brian Havens |
14 comments »
I am finding that turning green wood is an ineffable joy. But, there was a bit of an unexpected investment required to take advantage of this (usually) free source of wood. Kind of like those credit card commercials:
McCulloch 16” electric chain saw: $100
Wagner Shopline pinless moisture meter: $186
2 Spur Drive: $26
5 Gallons Denatured Alcohol: $64
Field guide to North American Trees: $14
Anchorseal Green Wood Sealer Gallon: $21
Rapport...
Read this entry »
118 days ago
by frank |
5 comments »
Views of Wood Expression
....you decide your view,my minds made up i am one,all one piece of wood….—by flp
————————————————————————————————————————————————————...
Read this entry »
