LumberJocks

Woodworking blog entries tagged with 'cedar'

  • Advertise with us
View Trapper brandenburger's profile

Marine Corps Naval cannon project #5: Fitting hardware and mortising out crossmembers.

07-25-2016 08:21 PM by Trapper brandenburger | 3 comments »

It doesn’t seem like it but I put in a long day and got a lot done. I put the main runners together and fit the hardware. Then measured again and did some layout work. I was then able to cut the cross members. Once I had that done I started to cut out the main runners to accept the crossmembers. These will be all threaded as well as glued. Any members have any tips for boring thru main runners and cross members? The paint turned out really nice.

Read this entry »


View Questtut's profile

Heavy Woodworkers Bench #2: The solution to keeping cost low (in my situation)

03-14-2017 04:55 PM by Questtut | 3 comments »

I know, not everyone is in the same situation as I am. Some are more lucky than I, and some just don’t have as many opertunities as I do. So that’s tosay, you may not be able to use the solutions I have, you may have other options I dont, but, this is what I found. As a commercial truck driver, more specifically a flat be driver, I have many opertunities to bring home what’s known as “dunnage”. In essence that is lumber (of many types and sizes) that is...

Read this entry »


View BigBrownLog's profile

The art of building Wooden boats

03-16-2016 03:14 AM by BigBrownLog | 8 comments »

I’m just getting this blog post started so it already set up, but in the next 6 months I should have everything up and running for me to build wooden boats for people. I’ll be starting out with some strip built kayaks and canoes most likely. In all actuality I have no idea what people are going to want. I plan on just getting the word out and let people come to me so we can sit down and draw up exactly what they want. After I’ve got a good thing going I will start cold moldi...

Read this entry »


View Jace McDaniel's profile

ATTN OKLAHOMA WOODWORKERS!!

05-10-2017 02:49 PM by Jace McDaniel | 0 comments »

So I noticed after looking on Facebook that there were no woodworking guilds in Oklahoma that I could fine so I’ve made a Facebook page titled woodworkers Guild of Oklahoma basically just because a lot of other states have a guild and my hopes are to build some networking and make some relationships with some other woodworkers locally because to be quite honest I don’t have but one friend who is a woodworker and he can’t do anything right now because of a personal injury. ...

Read this entry »


View kbybee's profile

Projects #1: Cedar Chest

04-17-2008 06:26 AM by kbybee | 3 comments »

This is a cedar chest I made my daughter 12 years ago.

Read this entry »


View Niels de Ruijter's profile

My canoe

04-16-2013 08:25 AM by Niels de Ruijter | 2 comments »

Routing the strips Red cedar My routing saw table The strips 6×19milimeterBundeling 10 stripsSave on a roofrack

Read this entry »


View Scott Parsons's profile

Renovation - Industrial Warehouse #1: The Proud Pauper's Way

02-02-2009 04:59 AM by Scott Parsons | 2 comments »

Well, it all started just a couple weeks before Christmas. I knew it was coming but didn’t appreciate the impact it would have. My girlfriend, Heather, and I decided that we wanted to live together but I didn’t want to leave my living space because it’s in the building I work in and I always wanted that warehouse living experience before I decided to truck it back out to the country. When I moved into this 500sq. foot shed-within-a-bigger-shed it was a nightmare. I kne...

Read this entry »


View Built2Last's profile

Spring cleaning in Fall still no fun !!!!!!!!

09-21-2009 04:07 AM by Built2Last | 2 comments »

A couple of days ago I decided it was time to build a rack to organize my nuts, bolts, screws, washers and other fasteners. I don’t know how I got so many but man, they are everywhere. As I sort thru them I am listing them and anything else I either don’t need, use or have more than one of on ebay. So far I’ve listed over 75 items I think and still have more to go. A couple of items are either rare or expensive like a Starrett calibrated master square set (http://cgi.ebay.co...

Read this entry »


View mpmitche's profile

Baby Tender #1: Blood, Sweat, ....

04-03-2010 07:47 PM by mpmitche | 0 comments »

I’ve put plenty of sweat into this project but today was the first blood. I cut myself on a plane blade clearing a shaving from the mouth. I guess that means it is still a pretty sharp blade. No tears yet but I’m sure when I put the little one in he’ll add plenty of them. Here are a few pics of the project so far. ” target=”_blank”>http://i827.photobucket.com/albums/zz192/michaelmbuffalo/Baby%20Tender/DSC02384.jpg

Read this entry »


View Jordan's profile

Sapele Maple Coffee Table #1: Planning

03-19-2014 05:57 AM by Jordan | 0 comments »

I have been planning a coffee table project for about a year now and it has gone through a number of design concepts. I have always wanted to build a table out of walnut and contrast is with maple accents. This is a recurring theme in my projects. I struggled with the theme and style for a long time. The intent was to be simple, but with some minor details that stand out and increase the technical aspect of the work. I also like square and simple lines with solid members. I am not a fan ...

Read this entry »


« prev 1 ... 25 26 27 28 29 30 31 ... 40 next »
396 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com