Dear fellow jocks, I want to report to you all the “odd” woodcarving methods (with photos) that I have been using in the completion of the announced chest of drawers. So, please, click here.
I haven’t got much done yet on the Celtic Knot carving. We’ve been up at our cabin, & there’s a lot of upkeep that hasn’t been done in the last couple of years, so please be patient with me.~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This is how far I’ve gotten so far.~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ I started getting sore fingers from this knife I’ve been using. So I decided to make something...
Edited 8/21/09: A couple of years ago I took an intro class on wood carving. The school had on hand some carving benches for the students to use but, naturally, I had to make my own design. Below is the design that I came up with. It was small enough for me to lug to class and large enough to handle most of the carving projects that I anticipate doing. It also allowed me the flexibility to accommodate various sizes of work and be able to reposition them without unscrewing and re-screwing...
So the chip carving has begun. I thought I would share a little bit of how to with you. I don’t have my entire pattern figured out, but I did choose this pattern for each of the points. So lets get started. You can purchase chip carving knives if you feel it is necessary, but I just use an old timer I’ve had since High School. It has 2 blades. The smaller blade is just fine for this type of work as long as you have it sharpened. Trace your pattern onto your piece by usi...
Updated 1/16/12 I spent a lot of time developing a way to let the lid swing down into the box, yet still maintaining a fairly tight reveal on all four sidesThe difficulty is the lip itself. It doesnt allow the back of the lid to drop into the box, so thats where we need to cut it away a little deeper at the back. I call these pockets.The other difficulty is in getting the hinge placement spot on or it wont open at all or not far enough to stay open. Here is how its done: Use the same pa...
I wasn’t supposed to work on this today because I’m supposed to work on a fence for the property I’m renting. I have a huge pile of fence material that the landlord and I just picked up yesterday. But I started this project this morning, blogged it around lunch time thinking I was done for the day, and then ended up back out there. This project has actually been kinda fun. It’s been fast, but fun. Total to this point is around 5 hours. The only thing left is the ...
I finally am at the end of this project. It took quite a bit longer then my initial thoughts, which was to just throw something together and call it a day. LOL. So a 5 hour project turned into 15 and I have to say that I’m glad that I took the leap. This gun turned into a cool little project and it requires a lot of different techniques. This gun was made out of 4/4 solid beech. I got to do the things I love. Turning, shaping, carving, and finishing. I had to do the cut out with a...
Updated 1/16/12 This is where you need to decide how you want to open your box. I mentioned at the outset about some of the different boxes I have made and how they hinge differently from one another. All are good, but you may have a preference in style or it may be your ability that decides for you. The pin hinge is what we will mainly be focusing on and was used on this box. Chapter 10 will discuss this style. The Deco box uses a standard brass butt hinge with a stop stra...
Well here I am now. The carving continues. I believe now that I am done with this first side. I wasn’t sure what to do to be honest with you, so I just sat there at the couch with it on my lap. I cut a piece of paper and taped it to the gun, cutting around the Drake. I just started doodling on it while watching TV and this is what I came up with. I decided that I wanted his Initials on the piece, but also knew I wanted them framed in leaves. These leaves are out of my head, so the...
I’ve decided to spend some time on this shotgun. It was a tough decision, providing that I’m giving it away to a 6 year old. But the reason I decided to move forward is because #1 I don’t think there is a toy gun as detailed as this will be, #2 I enjoy carving and it’s a good experience, and #3 maybe people will see it and either order one, or maybe even ask me to carve their real rifle. We will see if that works out. No matter what this kid is getting a very cool ...
- My Journey As A Scroll Saw Pattern Designer - 1196 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 87 parts
- Daily Update - 87 parts
- Just for Fun... - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- As The Lathe Turns - 67 parts
- Workshop Development - 66 parts
- Sheila Landry (scrollgirl) - 1218 entries
- frank - 417 entries
- degoose - 388 entries
- dbhost - 332 entries
- Ecocandle - 325 entries
- MsDebbieP - 301 entries
- Martin Sojka - 297 entries
- Karson - 294 entries
- William - 249 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- mafe - 207 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 187 entries
- Chris Davis - 183 entries
- Rustic - 183 entries
- PurpLev - 162 entries
- shipwright - 160 entries
- BritBoxmaker - 159 entries
- stefang - 145 entries