LumberJocks

Woodworking blog entries tagged with 'carving tool'

  • Advertise with us
View Dennis Zongker's profile

"Carving a Scroll Acanthus Leaf" Onlay Application

02-16-2010 12:36 AM by Dennis Zongker | 32 comments »

It’s about time! We finally got a good job with a lot of carving. It’s a three piece bedroom set. The style is close to the early Victorian Period. Their are 4 Scroll Acanthus leaf’s that I designed, two that go on the bed and two that go on the dresser. Now I am starting on the 8 turned legs with acanthus leaf carvings on them. All the carvings are out of solid cherry. Here are 33 pictures, on how to carve this type of “Architectural Ornament onlay application̶...

Read this entry »


View Andy's profile

"Art Box" Tutorial #7: The Medallion

07-01-2009 06:32 PM by Andy | 23 comments »

Updated 1/15/12 Now we need to cut a recess in the lid for the medallion to set down into.DONT cut your medallion until you have routed out the home for it.I typically make the medallion about 1” to 1.5” smaller on all sides than the lid depending on the box size and the piece of wood I have for the medallion. We are now going to make a simple jig for a router to set on and run back and forth making several passes of incrementally deeper cuts. There are a several ways to do ...

Read this entry »


View Andy's profile

"Art Box" Tutorial #9: It all hinges on this.

07-17-2009 03:53 PM by Andy | 8 comments »

Updated 1/16/12 This is where you need to decide how you want to open your box. I mentioned at the outset about some of the different boxes I have made and how they hinge differently from one another. All are good, but you may have a preference in style or it may be your ability that decides for you. The pin hinge is what we will mainly be focusing on and was used on this box. Chapter 10 will discuss this style. The Deco box uses a standard brass butt hinge with a stop stra...

Read this entry »


View WayneC's profile

Playing Around with Carving #5: Fixture to hold work for Relief Carving.

06-29-2011 11:21 PM by WayneC | 14 comments »

I am thinking of making a wooden fixture to hold the work piece when doing relief carving. I am trying to work around several constraints. For example, I really do not have access to the tools and equipment in my shop at the moment, so I am thinking of using common lumber that can be obtained from the local Home Depot or similar big box store. Also moving around the work is a hassel with my broken leg, so I would like to be able to be able to quickly rotate the work piece. This makes m...

Read this entry »


View Harold's profile

Simple Carving

05-20-2008 09:11 PM by Harold | 14 comments »

Much of the signage and carving I do is completed with a basic set of chisels and gouges and skills that most could duplicate with a little time. It isn’t necessary to be an accomplished artist, but you do have know what you like. As far as lettering, there are many different fonts available right on your computer. Taking advantage of this resource saves a great deal of time. The most common font used for carving I believe is Palatino, fairly straight line segments and a serif design that is ...

Read this entry »


View MyChipCarving's profile

Chip Carving Class - Quilt Squares #13: Pattern Downloads

03-29-2011 11:05 PM by MyChipCarving | 11 comments »

I’ve created 9 – 3-3/4” patterns and 6 – 5-3/4” patterns that you can pick from to chip carve. Creating your own patterns is encouraged too. Here’s a glimpse of one page of the 3-3/4” patterns. The easiest way I could come up with for you to be able to download these quilt square patterns I’ve prepared, is to post them in the My Chip Carving Member area. If you are already a member – log in and go to the Pattern Vault and look...

Read this entry »


View OregonBurls's profile

6 ft Stihl Chain Saw Cutting a large Oak

02-03-2011 12:39 AM by OregonBurls | 21 comments »

Sorry it has been so long between Posts. Many of you wanted to see my 6’ chain saw in action. So we put this video together. Enjoy!

Read this entry »


View MyChipCarving's profile

Hand Carved Sign #1: Pattern, Carving, Priming

10-04-2011 09:58 PM by MyChipCarving | 6 comments »

This is my first attempt at carving a sign. I’ve wanted to try it for quite a while. Our retreat center needed a sign by the road so this sign already has a home all picked out. Dimensions: 36” x 12” x 2”, basswood I know basswood isn’t the best exterior wood but seeing as it will be painted, I figured it should last many years as long as I give it proper care and maintenance. I created the pattern on my computer. Each letter stands 3” tall. The fo...

Read this entry »


View mpounders's profile

Carving lingo: study-sticks, rough-outs, go-bys....

02-21-2012 08:54 PM by mpounders | 6 comments »

Good communication is important to the success of many things. But terms and acronyms used in one setting may mean something completely different elsewhere. I heard a lot of unfamiliar words when I first started carving and continue to broaden my vocabulary, thanks to friendly carvers around the world. It took me awhile to figure out that BLO referred to boiled linseed oil used by some as a finish! So I thought I would write a bit to explain a few terms used, that might be of benefit to a beg...

Read this entry »


View MyChipCarving's profile

Chip Carving Class - Quilt Squares #7: Lesson 3: Pattern Development, Part 2

03-13-2011 05:48 PM by MyChipCarving | 13 comments »

I know that drawing and working on patterns is not enjoyable for many chip carvers. With that in mind, we will start carving tomorrow. I’d still like to encourage many of you to give pattern development a try.I’ll provide some patterns for you to carve. Adding your patterns to the mix will give our finished project more variety. Also, there’s a great sense of satisfaction knowing that the pattern you are carving is one that you came up with on your own. Here’s an...

Read this entry »


« prev 1 2 3 4 5 ... 47 next »
461 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com