Here is a video of my past and present projects. I thought it would be a lot easier to do it this way to show you some of my work. All projects from wood I have used either pallets or recycled wood from old furniture and off cuts I had laying around in the workshop. I really like to make and build many things as you can see. I hope you like what you see. I really enjoyed building everyone of these projects. I am currently working on a Homemade Bandsaw a drill press and a routing machine...
Hello, long time since I’ve been on site. Sorry to say, not due to wood working projects… Work has me jumpin building new automation, test equipment and I’m pushing to use Fanuc robotics more than we usually do. Never mind that, my topic and question:Has anyone here used the Laguna Swift CNC router and 3D design/G-code software? I’m thinking about a purchase and would like opinions. Thanks Magdaddy
Thank you for looking!
One of the things missing on this site is making knife scales. This is not something I normally do but I bought my wife some knives that required scales and during the process, noticed that we had several knives where the handles looked like crap, were cracked, and even broken. Some of them had really good blades and some were junk (these were tossed). During this process, the knives that I bought from Woodcraft have really nice blades but the rivets were less than desirable, sam...
This is the latest video on my Mandola build, Have a peek, follow the link… https://www.youtube.com/watch?v=cWz8o3kppJk!https://s3.amazonaws.com/vs-lumberjocks.com/o7l94rz.jpg!
View on YouTube I visited Michael Cooper in January of 2016. Michael is an unbelievably creative and talented guy. His body of work is so impressive that you will have to see it to believe it. He and his wife, Gayle, are as friendly, nice, and down to earth as Michael is talented. If I had to sum them up in one word it would be “Wonderful”. Michael Cooper Shop Entrance Entrance to Michael Cooper’s Shop Michael has a 2000 sq. foot shop in northern California. The setting is...
Well, been a day or two, i did get the second long post done. I also got the first short (front) post done. Drawknife and spokeshave work, then a lot of sanding. i did make one seat rail, as a pattern for the other two. Just a simple curve on the bandsaw. Spokeshave to clean up. Went to menards the other day, and bought a 5/4 thick piece of pine 5/4×4 x 8’. Figured I could use this for the rockers. Board is clear, straight and flat sawn. Turn it up on edge t...
I would like to share some work in progress photos of the carved icon frames and strips for the icon shelves I used to carve when I was working in the church workshop (2013-2014). Icon frames: Carved strips for icon shelves:
In this you-tube Video https://youtu.be/noTv8vTeENM, I explore the question, “How to sharpen a new chisel? I understand that there are many different strategies for this task but as a novice creating this video allowed me to focus on the keys points. The process that is demonstrated is broken down into three phases. First: An Oil Stone is used and can be found for about twenty dollars on Amazon as “Stanley 16-050 Sharpening System.” The stone itself must first be flattened and to do t...
I’m just getting this blog post started so it already set up, but in the next 6 months I should have everything up and running for me to build wooden boats for people. I’ll be starting out with some strip built kayaks and canoes most likely. In all actuality I have no idea what people are going to want. I plan on just getting the word out and let people come to me so we can sit down and draw up exactly what they want. After I’ve got a good thing going I will start cold moldi...
- My Journey As A Creative Designer - Woodworking and Beyond - 1750 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 109 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Toy costruction - 85 parts
- Life as an Amateur Woodworker - 80 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- Sheila Landry (scrollgirl) - 1775 entries
- dbhost - 428 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 304 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 250 entries
- Betsy - 228 entries
- stefang - 221 entries
- robscastle - 218 entries
- Dave Rutan - 217 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 194 entries
- A Slice of Wood Workshop - 192 entries