LumberJocks

Woodworking blog entries tagged with 'carving tool'

  • Advertise with us
View MyChipCarving's profile

Chip Carving Class - Quilt Squares #1: Class Description

03-02-2011 11:43 PM by MyChipCarving | 74 comments »

Hello and welcome to the first (of many ;-) LJ Chip Carving Class.I’ll be leading you step-by-step through this class which is sure to be a lot of fun. Skill level: All levels! I will provide instruction every step of the way! Beginners are my specialty :-). Advanced chip carvers are welcome too. Who knows, you might learn something along the way. Age level: 12 years and up Tools, equipment needed: Chip carving knife (If you need a knife and order one from the My Chip Carving S...

Read this entry »


View rivergirl's profile

SPOON, SCOOP, COFFEE or otherwise CLUB/Challenge

11-11-2010 03:46 PM by rivergirl | 50 comments »

HEAR YE, HEAR YE!! Yes, Virginia we now have definitive proof that cavemen did enjoy scooping coffee! In fact cromagnun man (and woman) were the precursor to modern day Starbucks. In response to my recent posting of a neanderthal period coffee scoop, that was presented alongside a lovely model crafted by my L/J friend Jerry W, it was suggested that we begin an archelogical study, a challenge or showcase if you will of scoops and spoons. Because it was my shamelessly (or was it shamefacedl...

Read this entry »


View WoodenFrog's profile

Making a Lamination Style Wearable Wooden Ring! With Inlay!

02-15-2013 06:08 PM by WoodenFrog | 49 comments »

Hi Everyone, this is my first time trying to do a blog. So please bear with me, I’ll do my best!I have had a lot of request to do a blog about my rings, I do 2 kinds of rings. The Lamination style and the Bentwood style, this blog is on the Lamination style. This ring is made out of Cocobolo, Brass and has a Mother- of-Pearl inlay. I start out with 3 thin squares of Cocobolo, about a 1.5”, I have a thin sheet of brass that I cut about the same size as the wood. I lay them out to o...

Read this entry »


View MyChipCarving's profile

Chip Carving Class - Quilt Squares #10: Lesson 5: Chip Carving Square #1

03-22-2011 12:07 AM by MyChipCarving | 48 comments »

Lesson 5: Chip Carving Square #1In this lesson you will apply what you learned in Lesson 4. This first quilt square is made up entirely of three corner chips. Here’s the pattern: Right-click on the image and select “Save Image As” and save it to your hard drive.I hope the pattern size will remain the same so you can transfer it directly to your square.If you need to resize the image, this can be done with a photo editor or in Word after inserting the picture. Practi...

Read this entry »


View Dennis Zongker's profile

"Carving Acanthus Leaves into, Lathed Fluted Columns"

04-01-2010 03:44 PM by Dennis Zongker | 37 comments »

There are 8 fluted columns to this bedroom set. The columns were turned on our “Legacy” Ornamental Milling Machine, by one of our shop craftsman, Dennis Nygard. I’m carving the 64 acanthus leaf’s by hand with “Pfeil” carving knifes and a small brass mallet. It’s easer to cut the solid cherry by lightly taping with a small mallet. Each leaf takes about 3 hours per leaf. Plus set up time and drawing time, which takes about 2 hours. So, each spindl...

Read this entry »


View OregonBurls's profile

How to find and harvest legal burls!

10-13-2009 05:44 PM by OregonBurls | 37 comments »

Hey everyone, It was suggested that I start a discussion on how to find and harvest burls. Please give your input also. I don’t deal with straight grain that often. I cut and sell burls for a living so here is what I know. It is illegal to harvest a burl without permission. of course if it is on your own property you can give yourself permission. What I do is put an ad on Craig’s list saying I want your burls. Most people don’t know what burls are. So you don’t get that many calls....

Read this entry »


View Dennis Zongker's profile

"Carving a Scroll Acanthus Leaf" Onlay Application

02-16-2010 12:36 AM by Dennis Zongker | 32 comments »

It’s about time! We finally got a good job with a lot of carving. It’s a three piece bedroom set. The style is close to the early Victorian Period. Their are 4 Scroll Acanthus leaf’s that I designed, two that go on the bed and two that go on the dresser. Now I am starting on the 8 turned legs with acanthus leaf carvings on them. All the carvings are out of solid cherry. Here are 33 pictures, on how to carve this type of “Architectural Ornament onlay application̶...

Read this entry »


View OregonBurls's profile

Tip of the day! Use a push stick!

01-17-2013 02:59 PM by OregonBurls | 30 comments »

THE ART OF NOT TAKING A TRIP TO THE EMERGENCY ROOM!Yesterday I awoke out of my daze of admiring a quilted maple block with a shocking sensation and blood everywhere. The dull blade on my bandsaw did not help and using my hands to push the beautiful block through didn’t help either. Simple word of advise which many of you can attest too. Keep your tools sharp and use a push stick! Lets say it all together now! Keep your tools sharp and use a push stick!Keep your tools sharp and ...

Read this entry »


View MyChipCarving's profile

Chip Carving Class - Quilt Squares #2: Supplies

03-03-2011 07:09 PM by MyChipCarving | 30 comments »

If you need supplies for class, I’ll be glad to send them to you.I’ll be posting the first session on Monday, March 7th, but you can always start anytime during the week. Order as many squares as you like. I’ll be providing plenty of patterns to choose from.Send an email to Marty@MyChipCarving.com to let me know what you need. Shipping is Priority Mail. Swiss cutting knife w/free sharpening $24.95 6” basswood square – $1.50 4” basswood square &...

Read this entry »


View WayneC's profile

Playing Around with Carving #3: Further exploration

06-17-2011 06:50 PM by WayneC | 28 comments »

I’m hoping to get some time today to do some more chip carving. That and sand a broken handplane knob for glue up. Between work and the leg, I am getting behind on the woodworking power curve. I signed up for a introductory relief carving class at Woodcraft and purchased a basic set of Ashley Iles (Lincoln Set) carving chisels. I can see this is going to be a money sink similar to wood turning. I have a flexcut strop, waterstone for my bench planes, worksharp, etc. But figur...

Read this entry »


1 2 3 4 ... 35 next »
346 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase