This very large, commissioned credenza was designed as an entertainment center to sit below a big, wall mounted, plasma TV. It is 76” wide 24-1/2” deep, and 34” tall. The cabinet and base are all solid walnut and the doors are bookmatched walnut burl veneers both inside and out. But first I want to thank everyone who visited and responded to my last blog; A glass top table with opposing arches And as always, I welcome your comments AND critiques on this latest project. The mai...
This was my first rocking chair I made, I built it about 3 months ago, actually did a blog on here about the build but never actually posted up final pictures actually this is the blog…..lol I’ve since built 4 more chairs out of various woods, this one was built using wormy soft maple that my brother had cut about 10 years ago from the bush behind my house. I gave this chair to my grandparents, as I didn’t fell that I could sell my first one also the ” quality ...
If you are just surfing through the internet about Walking Canes and found this posting, and you want to see some actual canes I’ve carved, click on the Widget Picture of the cane here. That project has more than 40 other links to other unique carved walking canes I’ve built. This blog entry is for showing a new concept sketch of a carved walking cane design that I am working on so that the prospective customer can view the concept drawings and provide his input, or approval. ...
This project is a few months old, but I’m just now getting around to writing this blog. I came up with a novel method of carving intricate shapes with a router, and I thought it was worth sharing. I’m probably not the first to come up with this technique, but I came up with it on my own without really seeing it anywhere else. The background: My wife wanted to make a large chalkboard to hang in our dining area, so I cut a large piece of cheap hardboard (30” square) and we ...
After some advice from other wise lumberjocks I decided to flatten the top by sanding it with my belt sander instead of trying to pull it flat with angle iron. It still has a very slight sag in the middle but it’s hardly noticeable and won’t affect the function of the table. I doubt the customer will ever notice unless they pour a glass of water into the middle of the table to see which direction it goes. I sanded it to 220 and then went back and filled a couple small bubbles...
Design Sketches for an American Eagle Carved Walking Cane for an Injured Iraqi War Air Force Veteran
If you are just surfing through the internet and want to see some actual canes I’ve carved, click on the Widget Picture of the cane here, and it also has more than 40 other links to other unique carved walking canes I’ve built. This blog entry is for showing a couple of new concept sketches of carved walking cane designs that I am working on so that the prospective customer can view the concept drawings and provide his input, or approval. thanks for reading,Mark DeCouhtt...
Okay I started this chair Jan 28th 2010 I wanted to get finish put on after 30 days…... simple goal eh? To my credit I got everything I could have done until I needed to use th 1/2’’ rabbit and 3/4 round over I did not have but ordered took 10 days to get here )-: So far total working days possible – 16 Progress This is a rocker design by Hal Taylor, I purchased his templates, PDF book, and video. I was at first a little on the fence as it started to a...
Hi,This is my first attempt at Blogging. I’ve been planning on building a fireplace mantel for quite a few years now. So late this fall I started on this project. The cold weather got an early start this year , so I couldn’t finish it, so I brought it to town to work on it this winter.My sweetheart has been snapping pics. of my progress. They turned out pretty good, so I’d like to share some with you. The shelf is made of 3/4” Birch plywood, with a Black Ash fascia...
After several hours of carving with my Dremel tool over the last two days, I completed the custom checkers for this project. This was my first attempt at wood carving and with 48 sides to carve, it was a bit tedious, but not too difficult. My skills improved a good deal by day two and I took some extra time to go back over the first day’s checkers and make sure they were all pretty consistent. I took some video of the carving process to post as a separate blog entry once I have...
Realizing that the story and photos of this walking cane project are decidedly Christian in content, if you are offended by such things, you should read another Blog. This project is a cane that I was commissioned to build, which tells the story of the Old Testament, the New Testament, and will be used to talk about the customer’s faith as he uses the symbols to tell the story. I hope that if you are offended by the content, that you will at least enjoy the woodworking process that is...
- My Journey As A Scroll Saw Pattern Designer - 1546 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 95 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1571 entries
- frank - 417 entries
- degoose - 394 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 271 entries
- William - 258 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- shipwright - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 188 entries
- Rustic - 186 entries
- Chris Davis - 183 entries
- BritBoxmaker - 181 entries
- Smitty_Cabinetshop - 172 entries