Lesson 1 – LayoutIn this lesson I will show you step-by-step how to draw the pattern onto our wine bottle holder. Before drawing any lines on your wood, be sure the surface is properly prepared. I covered this topic in a previous Lumberjocks Class. Here’s the link http://lumberjocks.com/MyChipCarving/blog/21835 With the wood surface prepared, we’re all set to draw our pattern directly on the wood. Use a soft lead in your mechanical pencil and compass. The soft lead is muc...
It is not always nice to have to stop a project because it is bed time, but it does give you a better perspective view the next morning. Before having this sharp object in your project, I figured I might as well do most of the shaping before the glue up. What I am not sure of is how big to make the handle. It seem too big, but I’ll make an other one after this anyway. I used the Elmer’s Epoxy. I hope this stuff will be strong enough t hold this together. Remember this is ...
https://www.youtube.com/watch?v=igqFQMv-qso&list=UUERIGfN6ATn5-U2DGhDzOvw In this time lapse video, I’m power carving a rocking chair seat by hand using a Kutzall carbide shaping wheel in Red Oak
Tenon cutters are quick but sloppy. See how-to carve a tenon using a draw knife that will look great and fit tight! See the full tutorial by following this link: http://logfurniturehowto.com/tutorial/learn-how-to-carve-a-tenon/
Follow along as I build a sculpted chair seat on youtube!
I’ve had a fun week. I’m building a chair to match the Tilt Front Desk that I previously posted, and blogged about. If you want to read about the desk, the posting link is given at the bottom of this blog. The desk chair is designed to fit the customer’s kitchen, as the desk is being placed in the kitchen area. She loves to cook, and hopes to move her laptop computer station to the kitchen where she can capture her thoughts on her cooking blog, and do more writing. ...
https://www.youtube.com/watch?v=UDpYB8rwUC4 Follow along as I assemble and carve a set of 4 beautiful Walnut bar height stools !https://s3.amazonaws.com/vs-lumberjocks.com/ngv0at6.jpg
Dave Sipe is one of the most interesting people I know so I had to share this with all of you! This video is an oldie but it’s one of my favorites! Enjoy!
I have had the idea to film in POV style for a while now, this is my first attempt. This video is basically pure raw footage, I will expand on this style of filming if there’s interest from my viewers, so please let me know in the comments below. Especially what you would like to see! https://www.youtube.com/watch?v=3wwxQR2_zB8
A Quick tip this time around – Demonstration of power carving using Kutzall carbide shaping products with an angle grinder and die grinder. https://www.youtube.com/watch?v=eaVU42KG9r4&list=UUERIGfN6ATn5-U2DGhDzOvw
- My Journey As A Creative Designer - Woodworking and Beyond - 1742 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 105 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 79 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1767 entries
- dbhost - 418 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 304 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 246 entries
- Betsy - 228 entries
- stefang - 220 entries
- robscastle - 218 entries
- Dave Rutan - 213 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 193 entries
- A Slice of Wood Workshop - 190 entries