Hello and welcome to the first (of many ;-) LJ Chip Carving Class.I’ll be leading you step-by-step through this class which is sure to be a lot of fun. Skill level: All levels! I will provide instruction every step of the way! Beginners are my specialty :-). Advanced chip carvers are welcome too. Who knows, you might learn something along the way. Age level: 12 years and up Tools, equipment needed: Chip carving knife (If you need a knife and order one from the My Chip Carving S...
This is my first attempt at carving a sign. I’ve wanted to try it for quite a while. Our retreat center needed a sign by the road so this sign already has a home all picked out. Dimensions: 36” x 12” x 2”, basswood I know basswood isn’t the best exterior wood but seeing as it will be painted, I figured it should last many years as long as I give it proper care and maintenance. I created the pattern on my computer. Each letter stands 3” tall. The fo...
I hesitate to do this, that which I am about to do. I don’t fancy myself as a good carver, or a great picture drawer. Especially with so many lumberjocks that are great carvers here that will see this. On top of that, there are so many great carvers on the internet that will stumble onto this blog because they surf the net. With that said, after Mark Mazzo asked about the process I go through to do a carved panel like this one, I thought about it for awhile, and decided to show th...
Chip carving quilt squares, lesson 1 I have a couple of items to cover before we get started with the first lesson. How many quilt squares should I complete?This is completely up to you! I hope that everyone will be able to complete one square to send to me for our LumberJocks Class Quilt. If you would like to send me more, that would be fantastic. How many quilts will we make?I will assemble as many chip carved quilts as possible depending on how many squares you send me. From the l...
Last night I applied the pattern to the top of this 16×9” stationary box top and got started on the chip carving. This is a fun one, for sure. I created this design after looking many times at a table cloth pattern. I knew that table cloth design could be chip carved so I used the basic layout and created this design to fit the top of this box. Stay tuned for more carving on this box…Martyhttps://www.MyChipCarving.com
If you carve, cut, sand, or even trim your finger nails (does that include everyone?) then you have got to check out this little rotary tool. This weeks review is on the Dremel 3000.
Hello everybody. I’ve got a 4 part series on how to make a hand carved box using mostly hand tool. Not much more to say other that, enjoy the show.Oh yeah, Safety Dan says “hi”.
My recent lumberjock postings of the walking cane work I have done recently has brought a lot of interest from folks wanting me to build them special, unique, elaborately detailed, walking canes and sticks. This new blog communicates the design process on one cane as I prepare to start the carving, and get approvals on the final design. The customer is a Youth Pastor, and needs to use a tall walking cane to support a bad knee. He and I have been designing this project for several weeks...
I designed a log clamp to hold logs that are too big for the lathe. My friend, Mitchel Dillman over at Colorado Rock*N Logs fabricated it for me. See how to use it to carve a tenon in this video! Please visit my website and FaceBook Page. Thanks!
Lesson 1 – LayoutIn this lesson I will show you step-by-step how to draw the pattern onto our wine bottle holder. Before drawing any lines on your wood, be sure the surface is properly prepared. I covered this topic in a previous Lumberjocks Class. Here’s the link http://lumberjocks.com/MyChipCarving/blog/21835 With the wood surface prepared, we’re all set to draw our pattern directly on the wood. Use a soft lead in your mechanical pencil and compass. The soft lead is muc...
- My Journey As A Scroll Saw Pattern Designer - 1434 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 93 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- Sheila Landry (scrollgirl) - 1458 entries
- frank - 417 entries
- degoose - 394 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- mafe - 232 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 197 entries
- shipwright - 193 entries
- Rustic - 186 entries
- Chris Davis - 183 entries
- stefang - 182 entries
- BritBoxmaker - 169 entries
- PurpLev - 163 entries