LumberJocks

Woodworking blog entries tagged with 'carve'

  • Advertise with us
View ScottShaeffer's profile

Just for Fun #5: Chainsaw Carve a Bear How-To

07-26-2013 04:10 AM by ScottShaeffer | 4 comments »

Dave Sipe is one of the most interesting people I know so I had to share this with all of you! This video is an oldie but it’s one of my favorites! Enjoy!

Read this entry »


View A Slice of Wood Workshop's profile

Tuesday Tool Time #4: With no further waiting.....THE DREMEL 3000

10-25-2011 12:51 PM by A Slice of Wood Workshop | 5 comments »

If you carve, cut, sand, or even trim your finger nails (does that include everyone?) then you have got to check out this little rotary tool. This weeks review is on the Dremel 3000.

Read this entry »


View Canadian Woodworks's profile

In the wood shop today #35: Power carving Walnut bar stools

12-20-2014 02:31 AM by Canadian Woodworks | 2 comments »

https://www.youtube.com/watch?v=UDpYB8rwUC4 Follow along as I assemble and carve a set of 4 beautiful Walnut bar height stools !https://s3.amazonaws.com/lumberjocks.com/ngv0at6.jpg

Read this entry »


View Canadian Woodworks's profile

Point of View #1: Rocking chair arm sculpting

05-02-2015 05:31 PM by Canadian Woodworks | 5 comments »

I have had the idea to film in POV style for a while now, this is my first attempt. This video is basically pure raw footage, I will expand on this style of filming if there’s interest from my viewers, so please let me know in the comments below. Especially what you would like to see! https://www.youtube.com/watch?v=3wwxQR2_zB8

Read this entry »


View Canadian Woodworks's profile

Time lapse Woodworking #24: Power carving a rocking chair seat

12-04-2014 12:25 PM by Canadian Woodworks | 2 comments »

https://www.youtube.com/watch?v=igqFQMv-qso&list=UUERIGfN6ATn5-U2DGhDzOvw In this time lapse video, I’m power carving a rocking chair seat by hand using a Kutzall carbide shaping wheel in Red Oak

Read this entry »


View PaBull's profile

Carving a carving knife #2: Finishing up the first carving knife

10-23-2010 06:20 PM by PaBull | 2 comments »

It is not always nice to have to stop a project because it is bed time, but it does give you a better perspective view the next morning. Before having this sharp object in your project, I figured I might as well do most of the shaping before the glue up. What I am not sure of is how big to make the handle. It seem too big, but I’ll make an other one after this anyway. I used the Elmer’s Epoxy. I hope this stuff will be strong enough t hold this together. Remember this is ...

Read this entry »


View Dan'um Style's profile

Haunted Forest TWO routering

10-17-2007 12:44 AM by Dan'um Style | 11 comments »

Forgot how messy a router is. Mahogany machines like butter.Photos are the project with one section roughed in … deepest section … about 3/8 depth using 1/2 router bit.A section with the poster glued on and the tools I’m using, less the dust collector. As mentioned in Marc’s blog … Bought a 1/8 down spiral do some detail work. One thing I didn’t plan for was the paper wants to lift up next to the router bit. My work around is scoring the drawing with ...

Read this entry »


View MyChipCarving's profile

Hand Carved Sign #1: Pattern, Carving, Priming

10-04-2011 09:58 PM by MyChipCarving | 6 comments »

This is my first attempt at carving a sign. I’ve wanted to try it for quite a while. Our retreat center needed a sign by the road so this sign already has a home all picked out. Dimensions: 36” x 12” x 2”, basswood I know basswood isn’t the best exterior wood but seeing as it will be painted, I figured it should last many years as long as I give it proper care and maintenance. I created the pattern on my computer. Each letter stands 3” tall. The fo...

Read this entry »


View ScottShaeffer's profile

How-To Make Log Furniture #2: How-To Carve a Tenon

01-31-2013 07:35 PM by ScottShaeffer | 0 comments »

Tenon cutters are quick but sloppy. See how-to carve a tenon using a draw knife that will look great and fit tight! See the full tutorial by following this link: http://logfurniturehowto.com/tutorial/learn-how-to-carve-a-tenon/

Read this entry »


View Mark A. DeCou's profile

Building a Carved Functional-Art Chair to Match the Tilt Front Desk

10-22-2007 06:17 AM by Mark A. DeCou | 16 comments »

I’ve had a fun week. I’m building a chair to match the Tilt Front Desk that I previously posted, and blogged about. If you want to read about the desk, the posting link is given at the bottom of this blog. The desk chair is designed to fit the customer’s kitchen, as the desk is being placed in the kitchen area. She loves to cook, and hopes to move her laptop computer station to the kitchen where she can capture her thoughts on her cooking blog, and do more writing. ...

Read this entry »


« prev 1 2 3 next »
22 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com