Hello and welcome to the first (of many ;-) LJ Chip Carving Class.I’ll be leading you step-by-step through this class which is sure to be a lot of fun. Skill level: All levels! I will provide instruction every step of the way! Beginners are my specialty :-). Advanced chip carvers are welcome too. Who knows, you might learn something along the way. Age level: 12 years and up Tools, equipment needed: Chip carving knife (If you need a knife and order one from the My Chip Carving S...
Chip carving quilt squares, lesson 1 I have a couple of items to cover before we get started with the first lesson. How many quilt squares should I complete?This is completely up to you! I hope that everyone will be able to complete one square to send to me for our LumberJocks Class Quilt. If you would like to send me more, that would be fantastic. How many quilts will we make?I will assemble as many chip carved quilts as possible depending on how many squares you send me. From the l...
I hesitate to do this, that which I am about to do. I don’t fancy myself as a good carver, or a great picture drawer. Especially with so many lumberjocks that are great carvers here that will see this. On top of that, there are so many great carvers on the internet that will stumble onto this blog because they surf the net. With that said, after Mark Mazzo asked about the process I go through to do a carved panel like this one, I thought about it for awhile, and decided to show th...
I’ve had a fun week. I’m building a chair to match the Tilt Front Desk that I previously posted, and blogged about. If you want to read about the desk, the posting link is given at the bottom of this blog. The desk chair is designed to fit the customer’s kitchen, as the desk is being placed in the kitchen area. She loves to cook, and hopes to move her laptop computer station to the kitchen where she can capture her thoughts on her cooking blog, and do more writing. ...
Forgot how messy a router is. Mahogany machines like butter.Photos are the project with one section roughed in … deepest section … about 3/8 depth using 1/2 router bit.A section with the poster glued on and the tools I’m using, less the dust collector. As mentioned in Marc’s blog … Bought a 1/8 down spiral do some detail work. One thing I didn’t plan for was the paper wants to lift up next to the router bit. My work around is scoring the drawing with ...
A Quick tip this time around – Demonstration of power carving using Kutzall carbide shaping products with an angle grinder and die grinder. https://www.youtube.com/watch?v=eaVU42KG9r4&list=UUERIGfN6ATn5-U2DGhDzOvw
It’s Monday and it’s back to the ole grind I go. This is another blog in my ongoing series to remodel my shop and make a saw till, drill press cabinet, tool cabinet, plane till and workbench. I have been woodworking for 16+ years and have always done my work in dark, dusty caves on anything that would resemble a bench. I have finally decided to spoil myself and go hog wild doing it. I wanted to bring you all along as I made these pieces as it will be a very epic build. I have ...
My recent lumberjock postings of the walking cane work I have done recently has brought a lot of interest from folks wanting me to build them special, unique, elaborately detailed, walking canes and sticks. This new blog communicates the design process on one cane as I prepare to start the carving, and get approvals on the final design. The customer is a Youth Pastor, and needs to use a tall walking cane to support a bad knee. He and I have been designing this project for several weeks...
Well the bench is coming along about as slow as possible. Working full time now doesn’t leave much of a window for me to be out there carving. And with some commissioned jobs coming up it will be worse soon. So I’ve been sort of rushing the carving while I’m out there and have to say that I feel somewhat bad, as I am trying to blog how to carve as well. So the tutorial will still happen, but it may not be up par (if they ever are).Right now I want to say that I’ve r...
Last night I applied the pattern to the top of this 16×9” stationary box top and got started on the chip carving. This is a fun one, for sure. I created this design after looking many times at a table cloth pattern. I knew that table cloth design could be chip carved so I used the basic layout and created this design to fit the top of this box. Stay tuned for more carving on this box…Martyhttps://www.MyChipCarving.com
- My Journey As A Scroll Saw Pattern Designer - 1661 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1686 entries
- frank - 417 entries
- dbhost - 400 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 281 entries
- William - 258 entries
- shipwright - 229 entries
- Betsy - 226 entries
- Stevinmarin - 212 entries
- stefang - 209 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 201 entries
- robscastle - 189 entries
- Rustic - 189 entries
- BritBoxmaker - 188 entries
- Chris Davis - 184 entries