Howdy, Not much time for woodshop lately but I have been able to put a little time in here and there. Today was about 4 hours. Here is where I’m at. I did some hand planning to get it in earshot range. I used a stiff metal yardstick like a scree to reveal high spots. Len – listen up please. I grabbed a card scraper and took down some of the ridges left by the planning. I know I need to keep working on the scraper edge. I ended up using the ROS after my hands got tired...
Sharpening card scrapers was never so easy, or so much fun… This week is all about card scrapers: how to sharpen them, how to use them, we make a rack to store them and a jig to burnish them. Along the way we do some fooling around and talk about Roy Underhill’s mustache! There are two projects in this episode, a tool review and a detailed demonstration of cabinet scraping goodness. Check out more episodes at Stumpynubs.com. Enjoy!
Both of these tools are very optional for the build…in fact I hope you don’t need these. I really do. I would love it if all your tenons come out perfect and that all of your planed surfaces come out gleaming and wonderful. If not… Card Scrapers will remove tear-out from even the most persnickety woods. They are cheap tools (you can even use a sacrificed saw blade…I have, and they work fine if you pick one without pitting near the cutting edge) but if you gra...
Just a quick post today. Carved out handle with rough spots. A little scraper and a little time. A little bit more here. And there we have it, smooth enough to work with. No sandpaper was harmed during the writing of this blog.
Hello all I though I would share my method for sharpening a card scraper (add to the million ways that are already out there)
MaFeBurnisher BLOGscraper set up tool Ok I posted the project, and here are the blog, since there seems to be some wishes for that now… If there are wishes, I’ll make a work drawing with measures, but I think it’s quite ‘out the road’.(And thank you, I’m better today, so I could spend a little quality time in the work shop 2×40 min.). The project comes from different ideas I have seen around, and the fact I’m not all happy for my VERITAS...
Episode 73 Panels from kostas workshop on Vimeo.In this episode I go through how to make a panel. I cut the panels down to size at the router table but there are a lot of other ways to do it. The 4 panels I made are for a curved top chest.
In this episode I glue up the bottom case. Then I start staining. http://kostasworkshop.blogspot.com/
In this episode I start working on the top part of the chest.
Some time ago, 105 days ago to be precise, I posted a forum question asking woodworkers who do not use card scrapers “why not?”. The intention was to get information which would help me make a video. As life has a way of getting in the way of plans, it took some time before I could make the video, but it has finally arrived. I look forward to your feedback.Here is the link to the video and the writeup from my video page:http://brianhavens.us/resource/card-scrapers If you hav...
- My Journey As A Scroll Saw Pattern Designer - 1196 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 87 parts
- Daily Update - 87 parts
- Just for Fun... - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- As The Lathe Turns - 67 parts
- Workshop Development - 66 parts
- Sheila Landry (scrollgirl) - 1218 entries
- frank - 417 entries
- degoose - 388 entries
- dbhost - 332 entries
- Ecocandle - 325 entries
- MsDebbieP - 301 entries
- Martin Sojka - 297 entries
- Karson - 294 entries
- William - 249 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- mafe - 207 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 187 entries
- Chris Davis - 183 entries
- Rustic - 183 entries
- PurpLev - 162 entries
- shipwright - 160 entries
- BritBoxmaker - 159 entries
- stefang - 145 entries