In this update of what I’m working on in my wood shop I give a quick walk through with a little discussion of the pieces. I start by showing my most recent finished coffee table which has a book matched live edge curly walnut top with my maloof inspired trestle table base, all from solid 2’’ walnut. I’m also working on a pair of my musicians chair, I’ve built a prototype and after lot’s of time sitting and playing guitar I’ve become satisfied wi...
In this video I’m applying my 3 part hand rubbed oil/resin finish to a Canadian Black Walnut coffee table base. I talk more about what and amount of ingredients in my 3 part hand rubbed oil resin finish. I can’t call it mine though, pretty sure it’s been used by many many people. I initially read about it in a Sam Maloof book I think it was called Woodworker. Well I hope you enjoy the video, I finish it up by showing the curly walnut book matched live edge coffee table to...
I’m using my band saw to re-saw a 2’’ thick piece of Canadian black walnut into 2 boards that I will glue up for the top of a coffee table top. This is a live edge board that measures about 17’’ at it’s widest part, I’ve already squared up the board using my planer due to the boards width. I plan on using the resawn boards for a solid walnut maloof inspired coffee table, I’ve never done this coffee table base with a live edge so I’...
Today I’m working on a solid walnut coffee table, cafe table, low back chair and rocking chair all built in the maloof style of joinery and sculpting. I’m walking through my shop located in Acton, Ontario, Canada, describing what i’m working on, my pieces are built in the maloof style so lot’s of sculpting and sanding (-: Very strong dowel and tongue and groove joints. Thanks for having a look!
Hey all, I’ve made another video this time I’ve just glued up the headrest of the current rocking chair I’m working on, I also discuss a little bit about the back braces. Hope you like it and again thanks for stopping by to have a look.
Here is another short video of what I’m up to, trying to stay busy which doesn’t seem to be a hard aspect in my life.Thanks for having a look. Paul
This is a test of a jimmy rigged lazy susan mounted to a slow speed gear motor.I always have ideas running through my head about how to share my custom wooden rocking chairs and other pieces, this is one of the less refined ideas, but i’m happy my idea is going to work out well once I get the bugs worked out. Hopefully soon I will build a dolly for the camera so the camera can move while the chair rotates. This example is using a Walnut with Ebony plugs custom wood rocking chair, ...
3 friends of mine dropped by and have a little jam session on a few cajon drums i’ve been working on. Reid is a member of Watasun please check out there face book. The Cajon drums are either built from solid wood or baltic birch. These are called a string cajon which has strings on one of the playing faces to add a snare effect. Thanks for having a look, if your interested in more information please visit my website, we not only build cajons but we specialize in custom wooden rocking...
In this time lapse, i’m building a trestle coffee table from Walnut. At this point i’m attaching the underside storage to the top of the table. The underside of the top and entire storage shelf has been sanded up to 500 grit and buffed with a wool pad to burnish and clean out the pores in the wood. What a shine one can achieve from just bare wood, its amazing, silky smooth! First I measure and drill the holes for the 2’’ x 3/8’’ dowels that will attach...
We decide to set up our Nikon D-80 on a tripod to make a time lapse video. I have done a bunch of reading, how to’s and what not regarding time lapse with a Nikon. Just hook it up to a computer, in our case a Mac Book Pro use Nikons Camera control software. The software has time lapse feature built right with every setting you would need to adjust. We setup the camera to take a picture every 5 seconds, then into Quicktime Pro at 15 frames per second. Anyways check it out, I think ...
- My Journey As A Creative Designer - Woodworking and Beyond - 1742 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 105 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 79 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1767 entries
- dbhost - 418 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 304 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 245 entries
- Betsy - 228 entries
- stefang - 220 entries
- robscastle - 218 entries
- Dave Rutan - 213 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 193 entries
- A Slice of Wood Workshop - 190 entries