Ever wondered how to become published? How to see your unique creation on the pages of your favorite woodworking magazine? Well, now is your chance to achieve just that! We’ve partnered with Popular Woodworking magazine again to present a new, exciting challenge for all members of LumberJocks.com. (If you’re not a member, now is the time to join us!) This time it’s all about the bookcases. Everyone needs them. Are you ready to design a bookcase that catches the eyes of Popu...
I’ve been planing on making a book case for a spare room in my house for awhile now. This contest was great in getting me to focus and finally finish the design. If you’re familiar with the Greene brothers and the Gamble house, you’ll see a lot of the design for this book case comes from the smaller of the two living room book cases.It’s a good size to fit into a guest bedroom. Besides holding books, I also want the piece to hide a small server computer, DSL router, eth...
This is a quick little tutorial in response to Blake’s question on how to draw floor plans in 3D in Sketchup This is the quick and dirty methodFirst make an outline of the inside dimensions of the room Then select all the lines by clicking on them with the shift key held down Then use the offset tool and click on one of the selected lines, and offset it 4 or 6” whatever you want.. Then you should have a separate area where the walls are Then grab the push pull tool ...
Cabinet Circumcision, Virtual and in Reality The entire cabinet is veneer covered particle board and is heavy. There were four screws in the bottom, four screws in the top, three screws in the back, and six staples holding each of the dividers (perhaps a little overkill?). The hardware was not added to the model to keep the model count below 60 as that is a limit for the free version of Creo. The cabinet top and bottom were doweled to the sides with eight dowels in each edge. Figure 8...
Found a link for sketch-up additions …. link... Haven’t tried any of them yet, I’m traveling etc , using my daughters pc, but couldn’t resit sharing.
I’m thinking of using cherry wood. The curve on the head and foot board are inspired by John McAlevey”s bed in Fine Woodworking Magazine #84. What do you think?
Our 17 year old tabby cat went to the happy hunting grounds last fall, and we decided to console everyone with what else…. a pair of kittens. A brother and sister….. too cute. They soon took to sitting in the window sill near where the bird feeders are hung and the plan was hatched for a kitty condo. I surfed the web with Google images to fill my head with hundreds of ideas, expecting to make the typical carpet lined sono-tube on a pole…. but then came across this des...
- My Journey As A Scroll Saw Pattern Designer - 1039 parts
- Extremely Average - 325 parts
- Daily Update - 87 parts
- A journey into the workshop. - 85 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Just for Fun... - 72 parts
- The Craftsman's Path - 67 parts
- Workshop Development - 64 parts
- 52 Weeks - 52 parts
- Sheila Landry (scrollgirl) - 1061 entries
- frank - 417 entries
- degoose - 384 entries
- Ecocandle - 326 entries
- dbhost - 318 entries
- Martin Sojka - 294 entries
- Karson - 288 entries
- MsDebbieP - 283 entries
- Betsy - 221 entries
- William - 210 entries
- Gary Fixler - 204 entries
- Stevinmarin - 197 entries
- mafe - 186 entries
- Chris Davis - 183 entries
- Todd A. Clippinger - 182 entries
- Rustic - 182 entries
- PurpLev - 159 entries
- BritBoxmaker - 146 entries
- scottb - 144 entries
- kosta - 144 entries