I saw this jig on Facebook today and it went immediately on my Christmas list! How long has this jig been out? Makes plugs to fill pocket holes. Basic kit makes plugs for standard pocket-holes and HD pocket-holes. You have to purchase a micro bit separately. Check it out…..standard kit# and the micro bit. If you own one, please comment on what you think of the jig.
Well today I got the doors hung. I still have one door to finish carving and put finish on, but I wanted to see how it was going to look. The soss hinges worked out nice and I am able to open the doors nearly 180 degrees. I ended up with a great fit, they close with almost no gap. I set the first door up and using that in I set the second in place. I have yet to install the tension catches that will hold the doors shut, but so far so good. When I was carving the door fram...
In the summer 1978 issue of FWW, Tage Frid wrote about tool cabinets.“Why bother making a tool cabinet when a crate with shelves nailed in would hold the tools? I believe if a person wants to make a living as a woodworker and furniture designer, a well-designed and executed tool cabinet is very important. It’s a pleasure to have a beautiful tool cabinet, where the tools are properly arranged and easy to find. And when a potential customer comes into the shop and sees a nice cabinet, half the ...
With the finish drying on her bureau, a process that was taking forever because I used from a can of Ace extra slow drying polyurethane on the top, My wife reminded me that she wanted the finish to be extra smooth with lots of coats so that she could roll out dough on the countertop, and that I needed put up the spice cabinet when I brought in her new bureau so that she could organize everything affected by the change all at once with minimal disruption to her kitchen. Unbeknownst to her, ...
Since I did a video how to fit inset doors, I thought maybe I should take a step backwards and show how to make a simple cope and stick cabinet door. Hope you enjoy the video, especially the ending.:-)
If you’ve ever struggled with setting inset doors, I have an easy method for you.
This was a cabinet i made for a customer of mine. The magazine, American Woodworker liked it and asked me to do and article on it. So i made another one. It’s made of cherry and has an unique locking handle on it. If you are intersted in learning more it’s featured in this months American Woodworker Magazine 164.The inset doors on it can sometimes be tricky to fit. But i have a methond that makes it easy. And when you’ll see it, you’ll never be intimidated by gett...
The Stumpy Nubs Workshop #19: "Raise your panel!" Who knew you could do THAT with a hand plane + another contest!
I don’t know why anyone would want to skin a cat, but I hear there is more than one way to do it. The same is true with raised panels, you know, the ones we use on all our fancy cabinet doors… So this week Stumpy tries to make one with nothing but a Stanley #4 hand plane… ...then he decides to make a machine to do it for him! Before all is said an done we have a new jig that does far more than it was originally intended to, and Stumpy is telling us the next best thing ...
This is a recent blog post I did covering the haunched tenons for the cabinet doors for a six-leg sideboard I am building. This is actually episode 9 of probably about a dozen, but this one stands well on its own since it covers a common joint for basic but strong cabinet doors. I have traditionally used cope and stick joinery for most of my cabinet doors, but this particular design does not call for any molding detail on the insides of the rails and stiles, so I figured I might as well use...
Looks like I went the slow route on my recent (and first) frame and panel doors! Might as well get an autosander, too.
- My Journey As A Creative Designer - Woodworking and Beyond - 1814 parts
- Extremely Average - 324 parts
- Toy costruction - 130 parts
- A journey into the workshop. - 115 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Woodworking on a Half-Shoestring - 91 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 82 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Sheila Landry (scrollgirl) - 1839 entries
- dbhost - 448 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- mafe - 322 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- Dave Rutan - 265 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 253 entries
- Betsy - 228 entries
- A Slice of Wood Workshop - 221 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- bandit571 - 211 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries