It’s Complete! With some paint screws and some half lap joinery, 2×4 bunk bed build is over. It was a fun project and will last a really long time. Check out the video, comment, like and subscribe. View on YouTube
Well in part 1 I went over cutting a tenon. Part 2 included how to chop the mortise. This time grab your drills and a few dowels as we pin the mortise and tenon joint together. This is as easy as eating cake, without all the calories. View on YouTube
Wow it seems like this is going slow. Work has been busy and finding time to work on this bunk bed is hard. However, I have finished up another step in the bunk bed and that is getting all the mortises chopped out on the ends. There were 12 total and they all went smooth. In this video I show what tools you need to mark your mortises as well as which tools you’ll need to chop out the mortises. Enjoy, comment, share, and give it a thumbs up! View on YouTube
What we are doing in the shop for December 09, 2009. The 41 school bookcases are being delivered this morning by Paul and Donald. When they get back they’ll work on some drawers for three different bed pedestals. I’ll be working most of the day on a loft bed. For missed video and building pictures see my Current Projects link at wwbeds.com or poggyskids.com. Watch us live:<div></div>
This is the installation of the 17 beds in the Chi Omega house. These were installed in the third floor attic rooms. It all went fairly smooth. Everything fit together like it was suppose to, nothing got damaged on the way there, and we made good time, considering total travel time was 6 hours up there an back. We installed them in 5 hours with 5 people. We did have one problem, contractor wasn’t finished with the smaller room that was to house the 4 bookcase bunk beds. We assembled the...
I now have the singles finish up. You can see the final post at http://lumberjocks.com/projects/18514 . Here is the drawing and finished product: The only thing I changed was the two doors into just one big one. The two smaller doors looked too small for the size of the opening. Now I will be working on the two styles of bunk beds. Before I left two weeks ago, I made the prototypes and cut out the parts. While I was gone. I had my crew prep and sand everything for me. Hopeful...
Here are the two designs for the bunk beds. I’ll eventually build 3 of one style and 4 of the other. The first on has a headboard similar to the single prototype that I built. The only difference is there is no fixed shelf at the top. I made it adjustable because of headroom. I also put an adjustable shelf at the bottom also. The second one is a bookcase design. I tried to keep the same style. I lowered the height of the headboard and built a couple bookcases for each level....
I am building a total of 17 beds for the Chi Omega Sorority house. There will be 10 single beds and 7 bunks. These bed are a different design. The regular singles will have a 80” tall headboard with just a couple shelves. They will have 23” tall drawer units on one side and doors on the other side and the foot for larger storage. The bunks will be built with a solid panel on the foot and a headboard similar to the single beds. They will all be built from maple wood with just a clear...
I had a request or two on how I made the Combination Loft. I was going to scan my notes and email them to the LJ but thought why not share with everyone. First remember these were intended for me so they may not make since to anyone else. I am posting it here so there can be dialogue back and forth. I’ve built this version two times. One time in white and the other time in the pine version. This is some dimensions to show the side panels Here are some more overall dimensions. ...
- My Journey As A Creative Designer - Woodworking and Beyond - 1752 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 109 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Toy costruction - 86 parts
- Life as an Amateur Woodworker - 80 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- Sheila Landry (scrollgirl) - 1777 entries
- dbhost - 428 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 304 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 250 entries
- Betsy - 228 entries
- stefang - 221 entries
- robscastle - 218 entries
- Dave Rutan - 218 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 194 entries
- A Slice of Wood Workshop - 192 entries