See this post and more at Pallet Craft Hello Readers! You have probably seen lots of things made from pallets on the Internet, from chairs to storage and much more. However there is a key distinction between building projects from pallets and building projects with pallet wood. While both of these methods are recycling the pallet wood and putting them to good use (which I applaud), I want to show that the wood from these pallets can be turned into beautiful pieces instead of usin...
Also see this on Blogger at: http://blogspud.blogspot.com/2012/07/pulling-boards-from-pallet-without.html Hello all, I have been working with pallets lately and I thought to myself “what if folks want to do this too?” So I decided to share what I found to be the best way to remove a board from the pallet without destroying the pieces. Step 1: Cut the boards off of the top of the pallet.From the edges as close to the brace boards as possible, cut the top Boards (top bec...
Hello Readers! Well from the title of this entry, you can probably guess what this is about. Yes, Halloween has not even come yet; Yes, Thanksgiving is more than a month away! But I have learned that planning and starting now will give me the time I need to get the projects done. Why wait until the snow is falling and the bitter cold bites? So what will I be building? Well that is a secret and I will post all about them on December 26th and 27th. I don’t want any gift receivers to...
Also at: http://blogspud.blogspot.com/2012/07/pallet-board-corner-entertainment.html Hey Everybody! Okay, so after the completion of my last project with pallet wood, I have turned my attention to an issue, my current embarrassment of an entertainment center. To be fair to myself, this was one of my first projects, it had doors, had a coat hanger pole, and was actually a dresser. But since we have moved, it is causing a bit of a clutter and is incredibly imposing. So what bett...
Hello All, This is not a new tip, but I thought I’d mention it in my blog anyways. As always see my blog at: http://blogspud.blogspot.com/ Ok so working with pallets is not always perfect, the wood is definately not top grade by any means and I will not pretend it is. So occasionally you are going to want to use a wood filler at some point. Now Elmer’s, as well as Varathane and Rustoleum sell wood filler that is pretty good, but the cost can add up significantly and this is ...
Hello Readers! Just a quick update: I got plans for the maloof chair, so I will be studying these extensively for my build. My wife has been perusing pinterest and the internet and has stumpled upon a few DIY pallet creations that she loves and wants me to recreate. Well its safe to say I am at no shortage of projects now… Here are a few of the projects she has in mind (more at my blog, I could not fit them all in this post): Now you might have noticed if you read m...
Hello All, As always check out this, and other projects at my blog: http://blogspud.blogspot.com/ I am finishing up a project I started on the side with my adult patio table set and I wanted to blog about it in my series while I wait for my wednesday pallet pickup for my next project as seen in my blog. This table is designed for my daughter to have and will have pretty much the same look as the full size set that I built. I plan to make like benches and stain the wood the same as we...
View this blog and others at my blog: http://blogspud.blogspot.com/2012/07/pallet-craft-childs-patio-table-set_17.html Hey All, Made some more progress tonight on the child’s patio table piece. I was able to join the top with the bottom and legs. Unfortunately its too late in the day and I still need to sand, touch up the piece a bit and then waterproof and stain to get the right finished product I want. Any other outdoor builders notice that the mosquitoes are a lot less friendly...
See this and more at my blog: Pallet Craft Hello All, Well today was kind of a bummer, a rain day interupted my plans to wood work, but my wife suggested a project that she would like me to do… a mobile for our daughter’s crib. “BRILLIANT!” I thought to myself as I grabbed a pen and some paper and proceeded to sketch my design shown below. Mobile Design Sketchup This design is pretty simple, the neck of the mobile will extend out over the crib and will be s...
Hello Readers, I have been working on several projects this year and I have made a lot of progress in the way of building things from pallet wood and ultimately showing the worth of the wood contained within the crude pallet structures. I have had some great successes such as the highchair: http://palletcraft.blogspot.com/2012/10/pallet-highchair.html As well as the storage bin: http://palletcraft.blogspot.com/2012/10/replacement-storage-shelves.html The Pallet Gate: http://pallet...
- My Journey As A Creative Designer - Woodworking and Beyond - 1742 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 107 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 80 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1767 entries
- dbhost - 420 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 304 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 246 entries
- Betsy - 228 entries
- stefang - 220 entries
- robscastle - 218 entries
- Dave Rutan - 214 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 194 entries
- A Slice of Wood Workshop - 190 entries