View this blog and others at my blog: http://blogspud.blogspot.com/2012/07/pallet-craft-childs-patio-table-set_17.html Hey All, Made some more progress tonight on the child’s patio table piece. I was able to join the top with the bottom and legs. Unfortunately its too late in the day and I still need to sand, touch up the piece a bit and then waterproof and stain to get the right finished product I want. Any other outdoor builders notice that the mosquitoes are a lot less friendly...
Hello All, As always check out this, and other projects at my blog: http://blogspud.blogspot.com/ I am finishing up a project I started on the side with my adult patio table set and I wanted to blog about it in my series while I wait for my wednesday pallet pickup for my next project as seen in my blog. This table is designed for my daughter to have and will have pretty much the same look as the full size set that I built. I plan to make like benches and stain the wood the same as we...
Hello All, This is not a new tip, but I thought I’d mention it in my blog anyways. As always see my blog at: http://blogspud.blogspot.com/ Ok so working with pallets is not always perfect, the wood is definately not top grade by any means and I will not pretend it is. So occasionally you are going to want to use a wood filler at some point. Now Elmer’s, as well as Varathane and Rustoleum sell wood filler that is pretty good, but the cost can add up significantly and this is ...
Also at: http://blogspud.blogspot.com/2012/07/pallet-board-corner-entertainment.html Hey Everybody! Okay, so after the completion of my last project with pallet wood, I have turned my attention to an issue, my current embarrassment of an entertainment center. To be fair to myself, this was one of my first projects, it had doors, had a coat hanger pole, and was actually a dresser. But since we have moved, it is causing a bit of a clutter and is incredibly imposing. So what bett...
Also see this on Blogger at: http://blogspud.blogspot.com/2012/07/pulling-boards-from-pallet-without.html Hello all, I have been working with pallets lately and I thought to myself “what if folks want to do this too?” So I decided to share what I found to be the best way to remove a board from the pallet without destroying the pieces. Step 1: Cut the boards off of the top of the pallet.From the edges as close to the brace boards as possible, cut the top Boards (top bec...
This week I embarked on my latest creation adventure which I made out of pallet wood boards… a patio table with benches! I wanted this to look prestine and clean while maintaining a sort of rustic feel that the pallet wood gives to it. So I went through my stock of pallet boards and pulled the best quality / matching sized boards I could find and used them in the project. The only things I bought for this project were the screws (I normally use the pallet nails for the ultimate recyc...
- My Journey As A Scroll Saw Pattern Designer - 1510 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 94 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- Sheila Landry (scrollgirl) - 1534 entries
- frank - 417 entries
- degoose - 394 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- mafe - 252 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- shipwright - 207 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 187 entries
- Rustic - 186 entries
- Chris Davis - 183 entries
- BritBoxmaker - 177 entries
- Smitty_Cabinetshop - 165 entries