I’ve been working on a custom home bar built from Bubinga and Walnut using solid and veneered wood. The counters will be protected from water using System Three Mirrorcoat a 2 part 2:1 epoxy finish that self levels and cures crystal clear. I had to give the counter a light sand and through 400 to 4000 then used a 3 step polishing process to bring the counter back to a beautiful gloss shine.
After posting a few of these neat little calls I thought some other folks might like to know how to make them. They are an easy project and another way to use some of that scrap wood. The easiest way to make a scratch box is to have a dedicated mortiser set up with a 1/2”cutter but since I don’t have one here is how I do it. If you do have one you can quickly see how to use it to accomplish what I am doing. I start with a 1 & 5/8”“x4” piece 1/2” t...
Recently I posted a video covering common woodworking joinery ( http://www.youtube.com/watch?v=zqXLYe783qw ) with the help of a few friends. In that video I talked to you all about making finger joints on the table saw and showed you a finger joint jig in the process. Well as I promised, here is the complete build process of that Jig. Table Saw Finger Joint Jig Also a little reminder about the 2nd Annual Whirligig Wars. It is almost here!! The event Runs from July 10 –...
What Is Burl? I have discovered that this question is the most searched question for burls on the internet. Over 140,000 times world wide per month. So I read what Wikipedia’s definition is and found out that they are not clear and in some details are wrong in their definition. So I am going to attempt to clear the muddy waters. First of all Wikipedia says: “A burl (American English) or bur or burr (used in all non-US English speaking countries) is a tree growth in which the grain ha...
Hey everyone, Just wanted to share a couple of shop Jigs with you. One is a quick and simple jig for quartering your sheets of sandpaper to use in your palm sanders or sanding blocks. The second jig is a multi function tapering Jig that lets you do 4 sided tapers as well as straight edging rough sawn boards and cutting angles also.. There could be many more uses, there are just the 3 I focus on in the videos. Part 1 Part 2 Part 3
Hi everyone, I’ve finally put together a small bit of footage from my daily activities in my wood working shop. I’ve been working on a Walnut and Bubinga home bar which is all done now, but still finishing up the live edge chair rail and wall paneling. At the same time I have 9 bar stools on the go needing to get shipped and deilvered soon. So there’s been some long hours in the shop this past month. In this video I’m making a rabbit on the chair rail to sit on top ...
Hey everyone, I was asked by a few of you from my blog “How to find legal burls” “once I get them how do I cut the burls”? Well I just made a short vidio on how I cut to the burl in the context of a bowl or hollow form blank. Please coment and add if I don’t cover it well. If you not want to go thru the hassle of finding and cutting your own you can alway buy from me. LOLThanksGreg Thanks Todd on the tip for getting the video on this post.
Just finished building a new HTML website. check it out and tell me what you think?If you have any need of Burl wood for your projects please take a look at my website or give me a call if you do not see what you need. OregonBurls.Com Please share this with all your friends. It will help me out a lot! Just swimming up stream against Obama economics. (sorry of you are an Obama fan) EnjoyGreg541-450-9499
I have been working hard on my new website and it is up and running. Please all you proof readers let me know if there is anything our of whack! Good with my hands not with spelling and grammer (lol). I have a new Blog that is called Burl Talk If you have any questions on burls or anything that has to do with wood I would be glad to give it my best shot. I am open with what I have learned in the burl industry. thank you for checking it out! Greg
Well, thanks to the comments and questions I have gotten I dug through my pics to find one I had on how to make a pot call. So for the folks that want a quick tutorial here we go. A pot call is basically a shallow dish containing two ledges inside. One is cut into the rim to hold the playing surface while the second is a ring left in the center raised to clear the bottom of the pot and still leave a space between the sound board that rests on it and the playing surface above it. One thi...
- My Journey As A Scroll Saw Pattern Designer - 1189 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 87 parts
- Daily Update - 87 parts
- Just for Fun... - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- As The Lathe Turns - 67 parts
- Workshop Development - 65 parts
- Sheila Landry (scrollgirl) - 1211 entries
- frank - 417 entries
- degoose - 388 entries
- dbhost - 331 entries
- Ecocandle - 325 entries
- MsDebbieP - 300 entries
- Martin Sojka - 297 entries
- Karson - 293 entries
- William - 249 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- mafe - 206 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 187 entries
- Chris Davis - 183 entries
- Rustic - 183 entries
- PurpLev - 162 entries
- shipwright - 160 entries
- BritBoxmaker - 159 entries
- stefang - 145 entries