Well guys after 2 days I finished my first whirligig ” Man cutting wood with a Laguna Bandsaw. If you would like to be part of the Whirligig Wars Woodworking Contest. Visit A Simple Design of Ocala for more information or check out my blog entry “Whirligig Wars Project contest” here on Lumberjocks to watch the video.. Hosted by Steve Ramsey of woodworking for mere mortals and Myself with prizes from Laguna Tools, Woodworkers Guild of America, Rockler Woodworking, Steve R...
This weekend was more like chemistry class than shop time. I have been experimenting with finishes for the rotary cut bubinga (kevazinga) panels. If I could get a clear coat that did not change the raw wood color, I would be happy. But so far most of my choices have darkened up the raw wood. I am really looking for a clear wood finish that enhances the grain without darkening it. Or a decent coloring that keeps the contrast against the mahogany border without obscuring the grain. ...
In this video I show you how to make a simple yet elegant lift lid box. These little boxes can be made with with different woods to give them their own character, and due to the simplicity they can be made in batches.. They make a great gift to give someone. The boxes in the videos are made from Spalted Pecan, White Oak, & Mahogany. Each Box was finished with 2 coats of Danish Oil to bring out the natural beauty and color of the woods. Also in the video I talk about an upcoming project...
What Is Burl? I have discovered that this question is the most searched question for burls on the internet. Over 140,000 times world wide per month. So I read what Wikipedia’s definition is and found out that they are not clear and in some details are wrong in their definition. So I am going to attempt to clear the muddy waters. First of all Wikipedia says: “A burl (American English) or bur or burr (used in all non-US English speaking countries) is a tree growth in which the grain ha...
I have been itching to make a table for a while now. Not just any table, mind you, but a live-edge table made from a slab or two. When summer began I told myself that I would do it, and while I was browsing the internet looking for wood slabs, I came across a gentleman who had literally hundreds of slabs sitting in his back yard, waiting to be sold.I looked up the address and saw that it was close to some family members, some seven hours of driving away. “Perfect excuse.” I tho...
A Simple Design of Ocala has teamed up with Woodworking For Mere Mortals to you bring you the fans and viewers a great Contest.We want you to build a Whirligig, of any shape or size! We are looking for creativity and just an all around fun project from you. and the best part is, you have a chance to win some Awesome Prizes!!This contest is sponsored by Laguna Tools which provided us with some amazing items to give away. A Complete List of Prizes is below with the Contest Details.Also Wood...
This is a time lapse video created using an I-phone on a tripod. I’m covering a recently finished bar top which is solid 2 5/8’ think live edge Bubinga in Three Systems MirrorCoat. This is a 2:1 epoxy that self levels and is completely clear, your able to remove bubbles with a blow torch one down side is a 3 day cure time 90%, 100% in 7 days Everything worked out well, this is still a project in progress so I will have more pictures and videos about this bar once completed ...
While I am waiting for the finish to cure on my tray project, I started my next adventure. I am building a sofa table to match, approximately, the end tables that I made last year (http://lumberjocks.com/projects/22185). I started by sketching out a design on paper with some basic measurements. Usually I get a little more detailed and do a scale drawing (I use MS powerpoint). Since I plan to match the end tables, I need a little less design detail and paper will do. Begin wit...
Hi everyone, Here’s a Maloof Inspired Shoe Bench built a while back, but the templates and instruction booklet are now available. This one was built from Bubinga, which made it a bit heavier than normal, but will probably outlast my grandkids. Quite a fun little project, especially my favorite part….the handles. Enjoy!
After posting a few of these neat little calls I thought some other folks might like to know how to make them. They are an easy project and another way to use some of that scrap wood. The easiest way to make a scratch box is to have a dedicated mortiser set up with a 1/2”cutter but since I don’t have one here is how I do it. If you do have one you can quickly see how to use it to accomplish what I am doing. I start with a 1 & 5/8”“x4” piece 1/2” t...
- My Journey As A Scroll Saw Pattern Designer - 1427 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 92 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- Sheila Landry (scrollgirl) - 1451 entries
- frank - 417 entries
- degoose - 394 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- mafe - 230 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 197 entries
- shipwright - 192 entries
- Rustic - 186 entries
- Chris Davis - 183 entries
- stefang - 178 entries
- BritBoxmaker - 169 entries
- PurpLev - 163 entries