Well, thanks to the comments and questions I have gotten I dug through my pics to find one I had on how to make a pot call. So for the folks that want a quick tutorial here we go. A pot call is basically a shallow dish containing two ledges inside. One is cut into the rim to hold the playing surface while the second is a ring left in the center raised to clear the bottom of the pot and still leave a space between the sound board that rests on it and the playing surface above it. One thi...
This Week I show you how to make a folding out feed table for your table saw. This design was based after an article and plan found in a 2009 issue of Woodworker’s Journal Magazine. Originally the plan was designed for a Cabinet saw with a Biesemeyer Fence System, so I had to make some slight modifications for my Porter Cable Saw. In this 3 part video series I show you a step by step on building this project as well as talk about the modifications I had to make. The Article and plans ca...
Hi everyone, I’ve finally put together a small bit of footage from my daily activities in my wood working shop. I’ve been working on a Walnut and Bubinga home bar which is all done now, but still finishing up the live edge chair rail and wall paneling. At the same time I have 9 bar stools on the go needing to get shipped and deilvered soon. So there’s been some long hours in the shop this past month. In this video I’m making a rabbit on the chair rail to sit on top ...
When it comes to shop storage, these simple shelves are an easy and versatile way to get your shop organized..Construction of the shelves is a breeze, and they can be designed to fit your storage needs
I’ve been working on a custom home bar built from Bubinga and Walnut using solid and veneered wood. The counters will be protected from water using System Three Mirrorcoat a 2 part 2:1 epoxy finish that self levels and cures crystal clear. I had to give the counter a light sand and through 400 to 4000 then used a 3 step polishing process to bring the counter back to a beautiful gloss shine.
In my last video I showed you all the renovation of the old shop space, during that renovation, I made some recess cavities in one wall of the shop. In this video I walk you through the steps of making the recess shelf unit to go into those cavities. These recess shelves are not just for the shop, they can be used in the home as well! Add some glass shelves and you have a nice knick-knack display shelf, or use them around the home for any organizing needs.
This is a time lapse video created using an I-phone on a tripod. I’m covering a recently finished bar top which is solid 2 5/8’ think live edge Bubinga in Three Systems MirrorCoat. This is a 2:1 epoxy that self levels and is completely clear, your able to remove bubbles with a blow torch one down side is a 3 day cure time 90%, 100% in 7 days Everything worked out well, this is still a project in progress so I will have more pictures and videos about this bar once completed ...
Hey everyone. I am offering exclusively to LJs frees shipping at www.oregonburls.com Here is the scoop!Orders over $75 I will pay for shipping excluding slab or heavy items (only in the USA). Email me with what you would like and I will invoice you and give you free shipping.Dont forget to sign up for the monthly wood give email@example.comPlease spread the word Merry Christmas!
We’ll I’ve spent 11 days in Toronto at the One Of A Kind Show and now i’m finally back in the wood shop. I’m working on getting a bar finished and installed before Christmas. The bar is built with walnut cabinets wrapped in frame and panel from bubinga and walnut. The counters are bubinga the upper being solid 3’’ think live edge! Have a look, hope you enjoy (-:
- My Journey As A Creative Designer - Woodworking and Beyond - 1766 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 109 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- Toy costruction - 93 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 80 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- Sheila Landry (scrollgirl) - 1791 entries
- dbhost - 430 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 304 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 252 entries
- Betsy - 228 entries
- robscastle - 226 entries
- stefang - 221 entries
- Dave Rutan - 219 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- A Slice of Wood Workshop - 198 entries
- Smitty_Cabinetshop - 194 entries