LumberJocks

Woodworking blog entries tagged with 'bubinga'

  • Advertise with us
View Canadian Woodworks's profile

In the wood shop today #20: Project update - chair rail,chairs,stools,coffee table oh my!

02-27-2013 10:35 PM by Canadian Woodworks | 5 comments »

SORRY ABOUT THE SOUND YOU WILL HAVE TO TURN UP WHEN MY VOICE GOES QUIET Walk through the wood shop talking about the various projects I’m currently working on. I have been working on a home bar that is made from Bubinga and Walnut I’m almost finished just the live edge Bubinga chair rail to be installed and some wall panels. I then show my most recent dining chair design that has a different shaped headrest, legs and an inlay of Gabon ebony. The chair is built from Canadian ...

Read this entry »


View ghost5's profile

Game Calls #1: Turkey Friction Call

02-26-2013 12:42 PM by ghost5 | 8 comments »

Well, thanks to the comments and questions I have gotten I dug through my pics to find one I had on how to make a pot call. So for the folks that want a quick tutorial here we go. A pot call is basically a shallow dish containing two ledges inside. One is cut into the rim to hold the playing surface while the second is a ring left in the center raised to clear the bottom of the pot and still leave a space between the sound board that rests on it and the playing surface above it. One thi...

Read this entry »


View WoodJediNTraining's profile

Make a Folding Out Feed Table for your Table Saw

02-20-2013 05:22 PM by WoodJediNTraining | 16 comments »

This Week I show you how to make a folding out feed table for your table saw. This design was based after an article and plan found in a 2009 issue of Woodworker’s Journal Magazine. Originally the plan was designed for a Cabinet saw with a Biesemeyer Fence System, so I had to make some slight modifications for my Porter Cable Saw. In this 3 part video series I show you a step by step on building this project as well as talk about the modifications I had to make. The Article and plans ca...

Read this entry »


View Canadian Woodworks's profile

Time lapse Woodworking #16: Bubinga live edge chair rail & sculpting a bar stool

02-19-2013 01:18 PM by Canadian Woodworks | 6 comments »

Hi everyone, I’ve finally put together a small bit of footage from my daily activities in my wood working shop. I’ve been working on a Walnut and Bubinga home bar which is all done now, but still finishing up the live edge chair rail and wall paneling. At the same time I have 9 bar stools on the go needing to get shipped and deilvered soon. So there’s been some long hours in the shop this past month. In this video I’m making a rabbit on the chair rail to sit on top ...

Read this entry »


View WoodJediNTraining's profile

Simple Pegboard Shelves for the shop

01-30-2013 06:00 AM by WoodJediNTraining | 11 comments »

When it comes to shop storage, these simple shelves are an easy and versatile way to get your shop organized..Construction of the shelves is a breeze, and they can be designed to fit your storage needs

Read this entry »


View Canadian Woodworks's profile

In the wood shop today #19: Pouring and polishing an epoxy bar top counter

01-28-2013 02:52 PM by Canadian Woodworks | 4 comments »

I’ve been working on a custom home bar built from Bubinga and Walnut using solid and veneered wood. The counters will be protected from water using System Three Mirrorcoat a 2 part 2:1 epoxy finish that self levels and cures crystal clear. I had to give the counter a light sand and through 400 to 4000 then used a 3 step polishing process to bring the counter back to a beautiful gloss shine.

Read this entry »


View WoodJediNTraining's profile

Getting Organized with recessed Shelf Units

01-23-2013 09:37 PM by WoodJediNTraining | 3 comments »

In my last video I showed you all the renovation of the old shop space, during that renovation, I made some recess cavities in one wall of the shop. In this video I walk you through the steps of making the recess shelf unit to go into those cavities. These recess shelves are not just for the shop, they can be used in the home as well! Add some glass shelves and you have a nice knick-knack display shelf, or use them around the home for any organizing needs.

Read this entry »


View Alexey Khasyanov's profile

How i make #6: Cutting board

01-05-2013 08:47 AM by Alexey Khasyanov | 4 comments »

project here

Read this entry »


View Canadian Woodworks's profile

Time lapse Woodworking #14: Bar Top Finish - Bubinga and Epoxy

12-27-2012 11:40 PM by Canadian Woodworks | 5 comments »

This is a time lapse video created using an I-phone on a tripod. I’m covering a recently finished bar top which is solid 2 5/8’ think live edge Bubinga in Three Systems MirrorCoat. This is a 2:1 epoxy that self levels and is completely clear, your able to remove bubbles with a blow torch one down side is a 3 day cure time 90%, 100% in 7 days Everything worked out well, this is still a project in progress so I will have more pictures and videos about this bar once completed ...

Read this entry »


View OregonBurls's profile

Only for LumberJocks... Free shipping at Oregonburls

12-14-2012 08:53 PM by OregonBurls | 1 comment »

Hey everyone. I am offering exclusively to LJs frees shipping at www.oregonburls.com Here is the scoop!Orders over $75 I will pay for shipping excluding slab or heavy items (only in the USA). Email me with what you would like and I will invoice you and give you free shipping.Dont forget to sign up for the monthly wood give away.greg@oregonburls.comPlease spread the word Merry Christmas!

Read this entry »


« prev 1 2 3 4 5 6 7 8 ... 14 next »
139 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase