Well Guys, I finally had an opportunity to sit down and edit a video that Brian Havens and I shot before he jetted back to his home in California. We had a great time working together on this project and it did well to support a local Billings organization that serves the developmentally disabled community. I also want to mention that a local LumberJock MTBrian also helped out and it was a good thing he helped what he did because we barely, just BARELY made it in time to the auction as ...
Whew! That was a close one! Brian Havens and I worked on the Shaker Bench for Charity right up to the last minute. The social mixer and appetizers started at 6:00p.m. This was when the items went on view for both the silent and live auction. I was spraying the final coat of lacquer on the drawers at 5:50p.m. while Brian showered and changed. Then I showered and changed while Brian and my wife Rita loaded the bench in the vehicle. By the time I got dressed, the bench was al...
Yikes! We are cutting this one close. The Shaker Bench for Charity is being constructed out of black walnut and it is gorgeous. But the drawback is that black walnut simply takes a bit longer to process than the cherry which all previous benches have been made of. When you multiply the extended processing time by several pieces it all starts adding up. Newspaper Coverage The Billings Gazette stopped out and took some photos and gave the story of our woodworking marathon for charity ...
Shop Update- Fellow LJ member Brian Havens flew out from his home in California Tuesday night to help me build a Shaker Bench for Charity. I think he may have questioned this decision as he arrived here in Billings at 11pm and the temperature was -3°. SNAP! Immediately upon arriving to my place we went straight into the shop. The next couple of hours were spent talking about our shops and the differences. It was only after our voices were getting hoarse and eyes blurry from fatigue did we ...
OK guys – you don’t hear much from me because I am swamped with work. This takes me away from blogging and from sharing with woodworkers. So one of the things that it detrimentally impacted is my schedule to build a Shaker Bench for Charity. To compound my schedule dilemma I thought the auction was Saturday night and turns out it is Friday night. This morning I throw a Tweet out there asking where are all the woodworkers that want to help me just for free, just for the exper...
This is a re-edit of the video that got me started doing videos. Unfortunately I knew very little about shooting and editing video at the time. In fact, I shot the video with a web cam, so the video quality is poor in parts. The re-edit gives it a nice face lift, but perhaps in the future, when I run low on topics, I can re-shoot the video. (Full steam ahead on Router Inlay!) Here is the link: Working with Melamine
- My Journey As A Scroll Saw Pattern Designer - 1541 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 94 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1566 entries
- frank - 417 entries
- degoose - 394 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 268 entries
- William - 258 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- shipwright - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 188 entries
- Rustic - 186 entries
- Chris Davis - 183 entries
- BritBoxmaker - 181 entries
- Smitty_Cabinetshop - 170 entries