Here was an easy project that I did recently; a Bagel – Bread Slicer. You only need one board for this project and it’s something you can build in an afternoon. Here is my attempt at making a video of how I made it, and as always you can check out my website at: www.woodlogger.com to see more projects and videos of what I’m doing in the shop.I also put up a listing of free project plans that you might find useful. It’s at: http://www.woodlogger.com/project_plans/  ...
The rumors are true. Occasionally, I actually do some woodworking. Many times I just have a limited amount of time and don’t post. I still need to get a digital camera to make the process easier. I was asked if I could make a dozen small bread cutting boards to be used for sending loaves out, along with jam, as Christmas gifts. As luck would have it, the same person also wanted me to help get rid of an old red oak hutch for her. So I am killing two birds with one stone here. The h...
I found time to get some shop time, and wanted to get back on track and get this project going (hard to do after a long pause). last time around I was milling the lumber, when my planer broke down on me in the middle. I have then milled some boards with hand planes, and fixed my planer, but at this point, I was a bit confused what was milled already, what thicknesses, and how much material do I have (more of a do I have enough? curiosity). I still had to mill the apple lumber and add it as...
OK, so now that the kitchen challenge is all over, I guess it’s a good time to post a blog regarding kitchen items … or… hold on… um – oops. too late. Oh well, I guess I’ll blog this anyways. So, the plan is to make a bread board. for the time being, the design shall remain unseen and will reveal in details as this blog series will progress. The board is primarily made of hard maple that I am recovering from bowling alley floors (I still have about ha...
We’ve been using the new top on top of our old table until I can finish the base. Over the last few months, the top has warped a bit, and was obviously out of alignment with the breadboard ends. While watching an old New Yankee Workshop online, I realized one of the things I did to cause this. I selected the boards for their aesthetic value, trying to match the grain to make it look like one solid piece of wood 38” wide. I neglected to alternate the boards’ growth rings,...
It looks like we’ll be running down to SoCal at the end of February to visit family & clients. We’ll take advantage of the opportunity to hit the Gamble House Joinery Tour, hit Disneyland while the kids are at school, and most importantly: Darrell Peart’s Greene & Greene Details I class at the William Ng School of Woodworking! I noticed that Marc Spagnoula (Woodwhisperer) is teaching classes there (i.e. Hall Brothers Frame, etc.). I’m really jazzed because...
While I’m ammonia fuming another project, I figured I’d make progress on this one. I pulled a WoodWhisperer and threw away the tape measure. I milled the ends to the proper thickness (which also gave me some nice mahogany veneer). I can’t tell you how lovely working mahogany is, compared to oak. Then while the stock was still one long piece, I used the table saw blade to make the dado that fits the tongue on the top (Darrell calls it the “core”). I achieved ...
As I was waiting for another project to dry, I did a little work on the table top. I had cut it oversized on purpose to take advantage of the wavy figure in the board. I then had to face the difficult decision of how to trim it down for a sofa/foyer table that didn’t stick too far out. I settled on a 14” wide board, which leaves plenty of room for a decent overhand in the front, 2 1/4” legs, and a side apron that doesn’t look like a chubby baby’s leg. I the...
Just a short update. While surfing plans, as I am wont to do, I stumbled across these trestle table plans. I didn’t give much thought to it, as it’s a bit too modern for me, but when I looked at the detailed preview, I saw something quite interesting. The plans include a leaf extension system that will work perfectly with my oversized breadboard ends. This means that I can make a table that seats six and with just a bit more work, seat eight.
To all of you Irish Lads and Lassies and wannabees Happy St. Patrick’s day. My Soda Bread I just made. The corned beef and cabbage, the potatoes are at the bottom. Enjoy your day. I’m wearing green.
- My Journey As A Creative Designer - Woodworking and Beyond - 1742 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 105 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 79 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1767 entries
- dbhost - 418 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 304 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 246 entries
- Betsy - 228 entries
- stefang - 220 entries
- robscastle - 218 entries
- Dave Rutan - 213 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 193 entries
- A Slice of Wood Workshop - 190 entries