If you found this page by searching for something related to Native American Indian Carved Walking canes, you might also like to see these finished canes I’ve made: Apache Geronimo Cane Cherokee Chief & Blackfoot Chief Curly Bear Cane Set Apache Cochise Cane Apache Chief Cochise #2 Cane Shoshone Chief Cane Indian Guides Chief Big-Red-Cloud Hiking Stick This blog entry is for showing a new concept sketch of a carved walking cane design that I am working on so that...
If you are just surfing through the internet about Walking Canes and found this posting, and you want to see some actual canes I’ve carved, click on the Widget Picture of the cane here. That project has more than 40 other links to other unique carved walking canes I’ve built. This blog entry is for showing a new concept sketch of a carved walking cane design that I am working on so that the prospective customer can view the concept drawings and provide his input, or approval. ...
I’ve mentioned him a lot in my posts so far, and luckily I was able to learn from him this past quarter as an intern professor. Richard Newman is incredibly brilliant and talented but unfortunately has given up on making furniture. Now he makes banjos, probably the most well made you can buy. He had a great run of making some of the most complicated, intricate, and precise furniture of his time. I could ramble on and on but here are pictures of some of his work. The centerpi...
My second oldest daughter needs a birthday gift and I have only days to complete it. Don’t you love those last minute projects? She is into carving, but only has the carving set with the “end blades”. So why not build a carving knife. So last knight I started with a block of pallet wood, a rod of 3/16 brass and a sawzall blade.The shape I was going for is shown here: I took a sawzall blade and cut it in half with a sheet metal cutter. (this stuff is hard to cut) After ...
I took a short break from wood today since I will quickly run out of things to do until my new Tenon Saw arrives. One thing that needs to get done is to make some dowel nuts for the bolts that will hold the long stretchers to the leg. There are a couple of reasons I wanted/needed them to be custom. 1st was that I couldn’t find any that were sold separately from the bolts. Most of the “bench bolts” I have seen for sale are only 6 inches long and I needed 8 inch bolts si...
Most all of my projects Have my brand on it in one place or another. Now, I don’t have a branding iron. But what I do have is a way of Chemically etching Brass plates with my logo on it. Here Is an example of one Now using the method I am going to show you, you can easily create custom plates as well for your projects. Not just logos but even plaques and signs.. Here are a few examples Here is how you can make an etched brass plate of your own….Now the first 2 vi...
This is a short blog, I hope, to show some work I was able to get built this week in the shop for a commissioned project. - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - - This tool is a Rounding Jack used to trim the brims of hats, and will be used by a discerning hat maker. In this exciting development, I have comp...
My recent lumberjock postings of the walking cane work I have done recently has brought a lot of interest from folks wanting me to build them special, unique, elaborately detailed, walking canes and sticks. This new blog communicates the design process on one cane as I prepare to start the carving, and get approvals on the final design. The customer is a Youth Pastor, and needs to use a tall walking cane to support a bad knee. He and I have been designing this project for several weeks...
I recently posted a forum question and got some good replies on the topic. I thought I’d write my official tactic here with some final thoughts… (I’ll get a picture posted to demonstrate soon) The problem I experienced recently was involving the insertion of brass screw inserts into some hard Magnolia lumber. I’m building a simple miter jig for my table saw, and I’m using inserts on the back of the fence to attach to the existing miter gauge. I could onl...
I decided that my first koa project would be a thank you gift for the couple who invited us to spend the week in Hawaii with them. She had bought a necklace and was looking at koa display boxes – it seemed to be a natural to offer up a display box. Board #2 (see previous post) was chosen. I spent quite a bit of time working out the design details:1. The necklace had to hang such that it spanned the width and length of the box. This required a trial fit with the necklace to get sure i...
- My Journey As A Scroll Saw Pattern Designer - 1561 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 96 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1586 entries
- frank - 417 entries
- degoose - 395 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 276 entries
- William - 258 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- shipwright - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 188 entries
- Rustic - 188 entries
- Chris Davis - 183 entries
- BritBoxmaker - 181 entries
- Smitty_Cabinetshop - 175 entries