LumberJocks

Woodworking blog entries tagged with 'brass'

  • Advertise with us
View WoodJediNTraining's profile

How to Etch Brass

01-31-2012 06:41 AM by WoodJediNTraining | 12 comments »

Most all of my projects Have my brand on it in one place or another. Now, I don’t have a branding iron. But what I do have is a way of Chemically etching Brass plates with my logo on it. Here Is an example of one Now using the method I am going to show you, you can easily create custom plates as well for your projects. Not just logos but even plaques and signs.. Here are a few examples Here is how you can make an etched brass plate of your own….Now the first 2 vi...

Read this entry »


View PaBull's profile

Carving a carving knife #1: First attempt to make a carving knife

10-22-2010 04:38 PM by PaBull | 11 comments »

My second oldest daughter needs a birthday gift and I have only days to complete it. Don’t you love those last minute projects? She is into carving, but only has the carving set with the “end blades”. So why not build a carving knife. So last knight I started with a block of pallet wood, a rod of 3/16 brass and a sawzall blade.The shape I was going for is shown here: I took a sawzall blade and cut it in half with a sheet metal cutter. (this stuff is hard to cut) After ...

Read this entry »


View Todd A. Clippinger's profile

Cutting Metal in the Woodshop

03-19-2012 01:17 AM by Todd A. Clippinger | 20 comments »

As woodworkers we also need to cut metal once in a while. Also, having the ability to cut metal will allow us to create custom handles as I have on past projects. The question is how do we get a clean cut? Hacksaw? Reciprocating saw? Nope – portaband is the answer. The portaband is a powerful, smooth cutting portable bandsaw and a tool that I recommend for any custom woodworkding shop. Hope you enjoy! Your friend in the shop- Todd A. Clippinger Share the Love~Share ...

Read this entry »


View Byron's profile

Inspiration #3: Richard Newman

11-23-2011 05:44 AM by Byron | 4 comments »

I’ve mentioned him a lot in my posts so far, and luckily I was able to learn from him this past quarter as an intern professor. Richard Newman is incredibly brilliant and talented but unfortunately has given up on making furniture. Now he makes banjos, probably the most well made you can buy. He had a great run of making some of the most complicated, intricate, and precise furniture of his time. I could ramble on and on but here are pictures of some of his work. The centerpi...

Read this entry »


View Duckarrowtypes's profile

The Danforth Standard Digitrola

02-15-2010 12:44 AM by Duckarrowtypes | 12 comments »

I’ve been working on this sculpture for a while at TechShop and at home. It’s taken a long time but I’m finally finished and wanted to share it with you. Video of it In Action Here’s my build-journal of sorts. I started out with a vague idea of making a digital Victrola. I thought about making an iPod dock attached to an old horn but quickly abandoned the idea for a couple of reasons: it’s been done already (!) and it didn’t satisfy my artist...

Read this entry »


View Mark A. DeCou's profile

Planning "Steps" for a Carved Story Stick, "The Gospel" Commissioned Walking Cane

06-03-2008 04:08 PM by Mark A. DeCou | 9 comments »

My recent lumberjock postings of the walking cane work I have done recently has brought a lot of interest from folks wanting me to build them special, unique, elaborately detailed, walking canes and sticks. This new blog communicates the design process on one cane as I prepare to start the carving, and get approvals on the final design. The customer is a Youth Pastor, and needs to use a tall walking cane to support a bad knee. He and I have been designing this project for several weeks...

Read this entry »


View Dave Rutan's profile

Small Brass & Wood Marking Gauge

07-16-2013 11:26 AM by Dave Rutan | 3 comments »

This does not qualify as woodworking, so I’ve placed it here. I don’t have a lot of use for a marking gauge, so I didn’t want to splurge on a manufactured one. I decided to try making a small marking gauge that would have brass elements. I like the look of brass and I’m a cheapskate to boot. I found a plumbing fitting which I felt would work. It was a 3/4 in. x 1/2 in. male adapter MPT x barb. I cut the theads off the 3/4 end with a hack saw and then ground off the re...

Read this entry »


View Mark A. DeCou's profile

Design Sketch: Crazy Horse Carved Walking Cane with Trailing Feathers, Antler Handle, and Scrimshaw

09-16-2008 02:28 PM by Mark A. DeCou | 3 comments »

If you found this page by searching for something related to Native American Indian Carved Walking canes, you might also like to see these finished canes I’ve made: Apache Geronimo Cane Cherokee Chief & Blackfoot Chief Curly Bear Cane Set Apache Cochise Cane Apache Chief Cochise #2 Cane Shoshone Chief Cane Indian Guides Chief Big-Red-Cloud Hiking Stick This blog entry is for showing a new concept sketch of a carved walking cane design that I am working on so that...

Read this entry »


View Mark A. DeCou's profile

Design Sketch: Carved Long Eagle Feathers on a Walking Cane , with Two Handle Options

09-16-2008 05:43 PM by Mark A. DeCou | 4 comments »

If you are just surfing through the internet about Walking Canes and found this posting, and you want to see some actual canes I’ve carved, click on the Widget Picture of the cane here. That project has more than 40 other links to other unique carved walking canes I’ve built. This blog entry is for showing a new concept sketch of a carved walking cane design that I am working on so that the prospective customer can view the concept drawings and provide his input, or approval. ...

Read this entry »


View HungryTermite's profile

Workbench #10: Custom brass dowel nuts for my bench bolts

03-07-2011 04:15 AM by HungryTermite | 5 comments »

I took a short break from wood today since I will quickly run out of things to do until my new Tenon Saw arrives. One thing that needs to get done is to make some dowel nuts for the bolts that will hold the long stretchers to the leg. There are a couple of reasons I wanted/needed them to be custom. 1st was that I couldn’t find any that were sold separately from the bolts. Most of the “bench bolts” I have seen for sale are only 6 inches long and I needed 8 inch bolts si...

Read this entry »


1 2 3 next »
29 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase