With the blade cut and drilled to length, and the frame shaped and finished (BLO) it was time to add some tension to the frame to pull on the blade. I was toying with some ideas, and ended up getting an IKEA steel wire hanger as the tension control. It’s quite simple, and uses 2 threaded ends one left hand one right hand, both pulling on the wire: Putting tension on the blade using this method is not as easy I was hoping it would be and requires a pin to roate and thread those...
I saw a bow saw one day on the internet, did some research on them and decided to make me one. I used rived oak for the two handles, cherry for the part that connects the handles (which is connected with mortise and tenon joinery) and some spalted wood for the handles that hold the blade. I had to glue a some cherry dowels I made into the spalted wood because the spalted wood was too soft to stand the pressure of tightening the blade. I cut two finishing nails and used them as pins to atta...
This is amazing.http://villagecarpenter.blogspot.com/2010/04/bow-lathe-and-fancy-footwork.html
Oak may not be a popular boat building material in the real world, but in my world it make a beautiful bed. I’ve been working on a boat bed for the last couple days now. Most of them that I build are painted and I build them out of a combination of Maple MDF and pine. This customer, however, wants their in oak. I have built one before and that example (see oak example) is what the customer sew and wanted. I’m even going to do the same color scheme. I framed out the bow of ...
I worked on the bow of the boat bed. This is a design that I came up with. You may have seen them with drawers in the bow, but I find those not very practical. Because of the shape the drawers must be a triangle shaped. Because of that they can’t hold much stuff. My design has been to use it as a toy box. I first cut the shape of the bottom. I now have templates. The top is the same shape but with a cutout, to make a face frame of sorts. I attach both of them to a back board using p...
Unlike my normal boat bed, this one will not be painted. It will be built in oak. Using oak on most of the project is, for the most part, straight forward. Not much different the using the maple and MDF on the painted version, until we come to the Bow of the Boat (AKA the toy box). Since we have a curved bow, a veneer must be used over the bending plywood. In prepping, I make sure all my staples are driven. I also fill all staple holes and imperfections with Bondo. This will keep tho...
See more photos on my project page [link] A bow vise is used to hold a violin bow while replacing the horse hair that vibrates the strings. I started by looking up such a thing and finding photos of (mostly) the commercially available models. Then I printed out a few screen shots for the details. I didn’t absolutely duplicate the commercial model, but I got something that will work. The wood is oak throughout. A few bibs and bobs of the hardware will be replaced with brass once I ge...
Hi! the first project I’d like to share with all yall this year is this bow saw I made. I was given a bow saw kit from Gramercy tools. Knobs, brass blade holders, 3 – 12 ” saw blades. They have the plans for free on their website…. however, like many of us, I can’t just go with someone else’s standard or ordinary set up. So I did a google search for bowsaw, and selected “IMAGES FOR *” and got thousands (well maybe only a hundred or so) of...
- My Journey As A Creative Designer - Woodworking and Beyond - 1815 parts
- Extremely Average - 324 parts
- Toy costruction - 130 parts
- A journey into the workshop. - 115 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Woodworking on a Half-Shoestring - 91 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 82 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Sheila Landry (scrollgirl) - 1840 entries
- dbhost - 448 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- mafe - 322 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- Dave Rutan - 267 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 253 entries
- Betsy - 228 entries
- A Slice of Wood Workshop - 222 entries
- stefang - 221 entries
- bandit571 - 214 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries