I’ve been playing a fair amount of hooky from the shop recently and these videos will stand as my excuse. Friendship and several of her adornments are LJ projects so I guess although sailing isn’t a woodworking topic I can sneak them in as ”how the project works” videos. These were taken yesterday on beautiful Cowichan Bay BC upon whose shores I have the great good fortune to live. There was a 10 to 15 Kn breeze along with a few whitecaps and beautiful sunny skies. ...
Stevenson Projects Weekender Sailboat Build #1: So it begins...wood arrives tomorrow...the quest to build a sailboat...
Ok…here I go…this is the official blog to begin what I hope will be a great quest—-to build a little sail boat by Stevenson Projects called “The Weekender”. I have been planning for this for many months and today was a big day. Here is a little bit of the path I have taken to get to this point in case you ever want build a boat. I just got back from the wood supplier and tomorrow I will have $1300 worth of wood delivered to my house. Its a bit daunting and ...
I just got Friendship back in the water for the summer last week and when I was getting her rigged at the dock someone ( OK me) sat on the acrylic top of the sliding hatch. This has been a weak point for seven years since I initially built her and it amazes me that it has taken this long to break it. Cutting to the chase, the replacement acrylic was going to cost $136 and wouldn’t be any stronger than it was before. I’ve never liked the plastic thing but it did give me a little mo...
Stevenson Projects Weekender Sailboat Build #15: My sail boat took a big step forward today...THREE DEEEEEEEEEEEEEE!!!!!!!!!!!
Well…your first thoughts to the pictures may be: “Looks like less boat then the last blog???” But that was the first dry fit…and so much has happened since then…today—while the pictures are a bit overkill…is a BIG DAY in our little boat… THREEEEEE DEEEEEEEEEEEE BABY! This morning we officially “assembled two of the assemblies”...and it went well…everything pulled down nicely and I am really pleased… Since the dry f...
To those of you who have requested more photos and explanations of my boatbuilding days, thank you for sending me into my stacks of old photos and allowing me the enjoyment of remembering a youth spent doing what I loved and creating just really cool stuff. My days building wooden boats, from age 22 to 55, are all magical memories to me from the aromatic smell of yellow cedar coming out of the planer to the amazing geometrical shapes of bent frames to the sheer mass of some of the timbers we ...
Well I just researched via “tags” the book forums and there are a few on LJ’s…but they are mostly regarding skills books—-which makes sense for wood workers… But recently I have been dreaming of building a boat…on a 5 year plan (if you look at my projects you will see I am not ready lol)...and so I have been getting lots of books at my local library…on boat building and other titles too… But one of the books that I picked up is not a...
Making the sail was an ideal time to overly complicate and over think the process… But I resisted my instinctive need to make things hard and just went with Shorty’s recommended measures and used two tape measures to define the shape of the sail. I just swung the ends of the tapes in their respective arcs until both ends met and voila a leg o mutton sail. Dead easy and fast. Shorty recommends duct taping along these lines and then cut along the tape. My first thought was to la...
Well I got my plywood home, although the fellow at the lumber yard looked at me kinda funny when I asked him to load load it on top of my RAV4 :-) I marked off my stations, measured for the cut lines, nailed, and the drew my cutlines along the station points. My circ saw is a bit dodgy so I thought I’d just join the two panels together and cut them on the bandsaw which worked pretty good. The cut, as you might expect when ‘guiding an 8’ long 2’ wide sheet f...
Well made a bit of progress today. Glued this down a couple of evenings ago and could finish mounting the locker bulkhead this evening. I’ve added the lid for the locker. I’m not impressed with the fit of the lid but I figure I’m spending too much time on it fiddling and I might just fiddle myself into winter without getting 816 wet. I’m telling myself its for ventilation so the locker doesn’t get musty:-) I did deliberately leave a bit of...
Its been a pretty productive couple of days, I left off having installed the chine logs on the port side. I now have the starboard side done the bow and transom pieces cut and their chine logs installed except for a goof up I’ll reveal in a bit things have been going pretty good. Last night I left it like this… It now looks a lot more boat like and it actually looks much roomier than my kayak so I am pretty pumped. I then flipped it over to look like this…. ...
- My Journey As A Scroll Saw Pattern Designer - 1198 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 87 parts
- Daily Update - 87 parts
- Just for Fun... - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- Workshop Development - 67 parts
- As The Lathe Turns - 67 parts
- Sheila Landry (scrollgirl) - 1220 entries
- frank - 417 entries
- degoose - 388 entries
- dbhost - 333 entries
- Ecocandle - 325 entries
- MsDebbieP - 301 entries
- Martin Sojka - 297 entries
- Karson - 294 entries
- William - 249 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- mafe - 208 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 187 entries
- Chris Davis - 183 entries
- Rustic - 183 entries
- PurpLev - 162 entries
- shipwright - 160 entries
- BritBoxmaker - 159 entries
- stefang - 145 entries