I’ve recently been in the market for a new dust collector. I really care about filtration, but do I really need a shop fox or grizzly portable cyclone, or should I go for a cheaper single stage model. I am just a hobbyist with a small shop in a two car garage. Any recommendations?
Vacuum splitter and a ‘dust can’this one is for Dan / Maveric. Yes the dust goes to Dan this blog is dedicated to him and his recovery… Why? Because Dan just had a terrible time and this might have some roots in the dust from the shop! I personally sometimes sneeze and cough when I am done with sanding and I have had my thoughts on this for a while.My Vacuum is a shop vacuum, but just a standard one from Atlas copco and I used simple 50 mm 2 inch plumbing to distribute it s...
Until recently the dust collection system, in my basement shop, consisted of a broom, dust pan and window fan. Then a really good Craig’s List find and some some subtle hints from Mimi (”YOU do the dusting and you’ll see just how bad it is!!”) has upgraded the old way. Although the system isn’t the most powerful- 1 1/2 hp- it has really made a difference; especially when I remember to open the correct blast gate. One thing I discovered is in order to maintain pea...
As part of setting up my wood shop, I decided adding a dust collection system was high on my priority list. I did a fair amount of research (somewhere between due diligence and mild obsessiveness) and did my best to make the decisions that fit my needs. I decided to post some information here since I got a lot of good data and advice from others here (and other sites). Sorry if this gets a bit long. Please note that I recognize there are many opinions on the “right” way to ...
Blast gate for shop vac50mm hose size. Back to wood…And dust.And more. Just had a three weeks influenza, could hardly breathe, so I thought it was time to kill the dust in my shop.Since I moved to this shop I always just moved the hose from one tool to the other, this also means sometimes not doing it, since I am really a human, or in other words; make mistakes and are sometimes more lazy than rational.But to set up my dust system again I needed some blast gates, since my number o...
When I first set up my shop, I bought a Delta 50-760 DC. It works well enough, but when jointing and planing a lot of wood the plastic bag fills up fairly rapidly and it is a PAIN to take off, empty and then re-install. Once you get the hang of it, the process is easier but it’s never easy and it almost inevitably ends up with a bunch of saw dust all over. So I decide to invest in a Oneida Super Dust Deputy. By the time I got it, I had realized that the fact that the Delta was mob...
I filmed the build on my YouTube Channel. Please check it out! Please like, share, and if you enjoyed the video subscribe! http://youtu.be/ACLFMAfV1fk I recently added a Clearvue Cyclone dust collector to my shop. I plumbed it completely with 6” and 4” PVC piping. I needed a way to close off each branch to maximize the performance of the dust collector. Commercially available plastic blast gates are way to cheap and clog easily. The metal blast gates that solve this issue are p...
Five years later, Workshop Remodel. Going from pretty to functional #11: Connecting, hanging, and shrinkng dust collection pvc
My method for making pipe hangers, connecting dust collection pipe for air tightness without tape, and shrinking pvc to hug blast gate flanges for small shop owners This is only my method of doing this. There are many good ways and your mileage may vary. I just thought I’d share it in case someone can used it. Thanks for watching. If the video doesn’t show below then you can see it here
This past year I have occupied my shop time in efforts to organize the shop and spent the time to build several shop tools and accessories. Having a garage shop that is primarily used for parking cars; it has been a constant challenge to optimize the space as a part time woodworking shop. This year I removed everything from the garage to thoroughly clean and re-organize the shop. I painted the walls and added 8 banks of overhead fluorescent lights to brighten up the space. Free up Spac...
- My Journey As A Creative Designer - Woodworking and Beyond - 1780 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 110 parts
- Workshop Development - 107 parts
- Toy costruction - 105 parts
- Just for Fun... - 98 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- Sheila Landry (scrollgirl) - 1805 entries
- dbhost - 432 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- mafe - 307 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 233 entries
- Betsy - 228 entries
- Dave Rutan - 221 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- A Slice of Wood Workshop - 203 entries
- Smitty_Cabinetshop - 195 entries