I finally got some time back in the shop. I calculated the size of the outfeed table, had a friend with a cold press laminate both sides of a sheet of MDF for me, I cut it roughly to size and set it aside to finish up the base cabinet. I lost some photos somewhere for the middle of this process, but once my blade storage shelves were sanded out, I turned some purpleheart center dowels on the lathe for the blades to sit on. I made two sizes, one for the 10” blades, and one for the...
In pondering the best way to store my table saw blades, I came up with this design. I’m sure I’ve just borrowed bits & pieces from other designs and combined them here though. Isn’t that the way it always happens? :) Here’s the assembled box with a few of my favorite Red, Silver, and my new Blue blades: #1 My Design Criteria:- Allow quick access to any blade without too much moving of other blades to get to the one I was after.- Provide reasonable protection...
While at Mom’s the other day I salvaged an empty pill bottle (fish oil, it’s BIG) thinking “This might be big enough to put scroll saw blades in.” Brought it home and today, while waiting for finish to dry… I tried it out and with some scrap 1/8th inch plywood made the holder. Nothing fancy. I didn’t even sand it. I made a ‘collar’ that will keep the blade ends in the center of the bottle so as to not interfere with the lid and labled it with th...
Over the last couple months things in the shop have been fairly quiet…mainly due to things in the house being more noisy! Of course, our now 5-month-old son Nathan’s an absolute joy and easily the least-demanding baby of the three. This weekend I snuck away for a bit to put the finishing touches on my new hide-away blade storage rack. Hidden Blade Storage When I originally designed the shop cabinets, I kept the drawer sizes and placements open figuring I’d work the fin...
I managed to sell my old scroll saw the same day Guy Pal put the down payment on the new saw. It’s a cheap Harbor Freight saw, but it comes with a decent supply of blades, the original box, the paperwork, and a sturdy stand. I good friend of mine pounced on it when I offered it to him at $45. This money will go directly into guy pal’s pocket to start paying off my new saw. I was going to put it on Craigslist for 50, but I do still have lots of fond feelings toward this saw. I made...
- My Journey As A Scroll Saw Pattern Designer - 1615 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1640 entries
- frank - 417 entries
- degoose - 397 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 279 entries
- William - 258 entries
- shipwright - 222 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 198 entries
- Rustic - 188 entries
- BritBoxmaker - 187 entries
- Chris Davis - 183 entries
- robscastle - 182 entries