LumberJocks

Woodworking blog entries tagged with 'biscuit joiner'

  • Advertise with us
View RonPeters's profile

Splines vs Biscuit Joiner #7: The box joint drawers

09-12-2010 12:37 AM by RonPeters | 3 comments »

Continuing my progress I decided that the box joint, per the plan, was the way to go. Instead of 5 drawers I did four. I had all 5 cut, but figured one extra big drawer would be more useful than 3 smaller, so I used the biscuit joiner to combine one of the two big ones with one of the small. It saved me from buying more wood and gave me more practice with the joiner. I checked around for plans for a box joint jig and decided that the one from Shopnotes.com (PlansNow) was the better of the ...

Read this entry »


View brianb6603's profile

Small workbench based on shipbuilt's Short Block V8 (Workbench Challange) #3: Leg stretchers, assembly bolts and bottom shelf.

03-21-2015 05:15 PM by brianb6603 | 4 comments »

This part was very straight forward, The stretchers were assembled from 3 strips of 3/4” BB glued together with Biscuits to help keep everything aligned. The center strip is 1/2” longer to make a tendon. Next I made a router template to make the mortises in the legs. At that point it was just a matter of laying them out and cutting them. While I had the legs out I needed to make clearance slots for the 2 dog holes on each side of the left side leg. ...

Read this entry »


View bigchopperoo's profile

Country Style Cabinet

03-17-2013 11:31 AM by bigchopperoo | 3 comments »

So a few weeks ago i posted a picture of the cabinet I made for American Woodworker Magazine. Well finally I’ve got the video done. Hope you enjoy it.

Read this entry »


View Guy Dunlap's profile

Small Secretary With Tambour Door #8: Base Internals and Assembly

02-15-2015 05:02 AM by Guy Dunlap | 4 comments »

In this video, I make the center divider for the drawers in the base. I also add some kickers for the drawers. After sanding, I glue it up taking special care to line up the inlay on the rails with the legs. As always, I welcome your questions and comments! http://youtu.be/PFsOgxD2R2w

Read this entry »


View OregonBurls's profile

Booking Wood Turner Clubs!

07-19-2010 10:40 PM by OregonBurls | 7 comments »

Hey everyone, I am booking wood turning and wood working clubs to come and sell my burl wood. If you are interested in scheduleing reply of call me. I will be headed to Southern California 2nd week in August August 15th I will be introducing myself to the Wood turners club in Grants Pass, Oregon. Would love to schedule something north in Portland and up to Washington. I would evern consider going east coast if it was a large enough group. I am game for almost any place in the USA. I ha...

Read this entry »


View WoodJediNTraining's profile

Hickory Chest Build #2: How to build a Raised Panel Hickory Chest

01-31-2012 06:06 AM by WoodJediNTraining | 0 comments »

Hi everyone. I first off want to say I am sorry it took so long to get back here. Between Facebook, Google plus and Youtube and my website http://www.asimpledesignofocala.com . I never made it back here to update this series. Well the Hickory Chest build went very well. It ended up being an eight video series from start to finish. The Hickory Chest featured Raised Panel construction and the chest was lined with cedar. This project started when a client asked me to build a blanket chest for...

Read this entry »


View WoodJediNTraining's profile

Hickory Chest Build #4: How to build a Hickory Chest. The Conclusion

01-31-2012 06:20 AM by WoodJediNTraining | 2 comments »

Well if you have made it this far, why not go a little further and watch the conclusion of this chest. It has been a fun build so far for me. I hope it has been informative and somewhat enjoyable for you to watch as well. Now I know the video quality isnt the best. but As I go on it has gotten better….Now in this present day I have a new camera, lighting and it has helped a lot. Here are the final 3 videos of this chest build. Parts 6, 7, 8 Part 8 was pretty basic, the installation ...

Read this entry »


View brianb6603's profile

Small workbench based on shipbuilt's Short Block V8 (Workbench Challange) #2: The Tops

03-16-2015 12:55 AM by brianb6603 | 2 comments »

Well, the tops have taken longer than I anticipated. But it has turned out nice. The original Short Block V8 designed with a Torsten box top but I wanted a solid top. After lots of consideration I decided that I wanted the top to be Baltic Birch laminated on edge for the top. This would be consistent with the leg construction and would make for a very solid top. However this presented an issue as Baltic Birch is not cheap (best price here in Oregon, USA is $55.00 for a 5×5’ sheet...

Read this entry »


View OregonBurls's profile

Selling Your Art Work?

08-27-2012 05:09 PM by OregonBurls | 12 comments »

Hey everyone, I have just redesigned Oregonburls.com would like to offer an artist page. I know that it is expensive to get your art into galleries that charge up to 40% of the sales price and ebay up to 25%+. Oregonburls.com is an advertised site. This page (Artist Corner) would allow you to sell your wood creations with just a flat fee of 10% of the sale price.You would keep your item and when it sells I print the shipping label and email it to you along with sending you a check or pa...

Read this entry »


View superstretch's profile

Walnut and Oak Entrance Shelf #1: Basic construction

03-30-2011 10:39 PM by superstretch | 6 comments »

Its been a while since I’ve posted anything project-related. My time has been consumed with work-work and not wood work. So my wife has this table which she moved into the house when we got married. I can’t stand the thing and it is constantly being bumped, knocked over, and hit into the wall. Its ugly, veneered, and flimsy so I’ve tried everything short of burning it to get it out of there. Finally my wife told me to make something to replace it or get lost. My...

Read this entry »


« prev 1 2 3 4 5 ... 16 next »
159 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com