LumberJocks

Woodworking blog entries tagged with 'biscuit joiner'

  • Advertise with us
View SFDCapt's profile

Cherry sideboard #5: Carcass and drawers

03-18-2014 05:05 PM by SFDCapt | 2 comments »

Well it has been a few weeks since any update on this project. Between work schedule, family and, kidney stones I got a little behind. Anyway here is the latest on the Stickley sideboard. I managed to get the two side panels made and glued to the legs, as we saw in the last installment of this blog. Then I used some birch plywood to make the back and bottom of the drawer area. I went with the plywood for two reasons. First being the stability and second the ease of use. These two pie...

Read this entry »


View Jim13's profile

Before you buy any tool read this: A lesson; purchasing tools

05-25-2008 10:57 PM by Jim13 | 8 comments »

!!!!!!!!!!!!!!!!!!!!!!!!!!!!DISCLAIMER: This article is based on personal experience and preference. I am not responsible for absolutely any personal damage, monetary loss or any “bad happenings” that came/come about through the outcome of this article. By reading this article you 100% agree to the terms of the previous statements. Again I am 100% NOT responsible for any bad mishaps that come about!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Thank you Almost all woodworkers ...

Read this entry »


View rwyoung's profile

Step-back Cupboard Build #1: Lumber prep

06-09-2009 06:04 AM by rwyoung | 0 comments »

I decided I need a nice place to keep some china what-not that has started to accumulate around here. My parents keep dropping off stuff that they have stored at their house, now it is getting stored in mine… After much looking around and cogitation on the matter, I decided the first thing to make would be a cupboard, specifically a step-back cupboard. These are open on the top, and a closed cupboard on the bottom. Sometimes two pieces, other times one. Later I’ll look into...

Read this entry »


View wdwrkr631's profile

New Video On YouTube - Mid Century Modern Hall Table Build Pt.1

04-03-2015 10:23 AM by wdwrkr631 | 2 comments »

Hello all,Just added a new video to my YouTube channel. In this two part video series we build a Mid Century Modern Hall Table with Hairpin Legs. The build is coming along great. Take some time and check it out. when you check out the video don’t forget to subscribe to my channel. Here is a link to my channel & video. Thanks in advance for your support. Here is a link to my channel & video. https://www.youtube.com/watch?v=FLScGspjapE

Read this entry »


View Willeh's profile

Dart Board Cabinet #1: Every project is an opportunity to learn

01-13-2012 05:23 AM by Willeh | 2 comments »

The wife and I have recently gotten into playing darts as a hobby. We’ve been playing in our basement on an old dart board that I inherited from my dad housed in a ratty cabinet that looks aweful. Im currently in a lul for projects as it is now cold outside and my garage/workshop is unheated and uninsulated and its too cold to work in at this time of year most of the time as any project of size requires having the garage door open to wheel out the table saw to have enough room to wor...

Read this entry »


View therookie's profile

My First Real Attempt at a project. A shaker end Table #6: Been A while but making progress.

01-10-2011 01:01 AM by therookie | 2 comments »

Well it has been a long time since I added an entry to my blog so I thought that I would continue updating my progress on the two shaker end tables I am building. Now that I have a biscuit joiner and a dovetail jig I was able to make the drawers and have been doin pretty good. I have changed the design so I can cover up the end grain as best I could and decided to put on a walnut bread-board edge.The drawer sides and back have to put the pins in the front still and mill the grove for the bott...

Read this entry »


View matt garcia's profile

Progressing Forward

12-13-2010 04:17 AM by matt garcia | 7 comments »

Well it finally wamed up enough around here to do some glue ups. I got my feet made and glued up, and attached them to the base. Then I routed the edge of the base, and made the transition moulding and glued that. Now a mother cold front has come through, and it looks like it might freeze tonight!! Good thing I got busy in the shop yesterday. I also went to Clark’s for some secondary lumber. It must have been my lucky day Saturday!! When I arrived at Clark’s, first thing ...

Read this entry »


View Woodworker_Collins's profile

Adams Wood Creation has gone public ( http://www.adamswoodcreation.com )

09-23-2012 11:18 AM by Woodworker_Collins | 3 comments »

http://www.adamswoodcreation.comAdams wood creation has gone public. If you were wondering i haven’t been on Lumberjocks for a long time now because i have been working on my website. As we all know woodworking is brilliant but its not cheap so ive made the site to get a business going for me and simply to pay for wood to make more projects all the projects i make wil be the highest of quality and will ship to you as soon as possible. Obviously i know because were all woodworkers probab...

Read this entry »


View icemanhank's profile

River Red Gum Coffee Table #2: Levelling table top and making legs

07-27-2013 09:35 AM by icemanhank | 1 comment »

Hi again, It’s been a while as I have been away but here is my progress on the table. I have levelled the tabletop using a large belt sander and a straight edge, quite a time consuming job but I think the end result was worth the time. Then I hit it with an orbital sander using a few different grades of paper. Here is a pic after the first coat of Weatherfast Polyclear boat varnish, I decided not to fill the many holes as I want it to look as natural as possible. The varnis...

Read this entry »


View rando1's profile

Day 1 design and pulling together some pieces

07-28-2010 04:48 AM by rando1 | 0 comments »

We are working on a entry bench and mirror set for a homeowner. There is a small space in the entry of the condo by the base of the stairs that will accommodate a sitting bench and decorative mirror. The mirror unit will be made up of poplar and will have a dark finish. An existing mirror from the powder room has been fabricated and will be framed. a shelf and crown trim will be at the base and crown and a shelf will finish out the top. The bench seat will have a flip lid to store thi...

Read this entry »


« prev 1 ... 10 11 12 13 14 15 16 ... 18 next »
179 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com