On the suggestion of a couple comments from juniorjock and dantheboxmaker, I decided to try my first blog…anywhere…ever. I don’t really know what I’m doing, so I hope this turns out. Thanks to all who made the kind comments to my posting of this project. These are some of the steps I went through to make the “Frame / Panel Keepsake Box” at http://lumberjocks.com/projects/7096. Frame/Panels:This box consists of five Frame/Panels (FP) – the top, and the four sides making the carcass....
I’ve been rather busy with life the last couple years, but I’m finally back in the shop and up to no good again! Here’s what I’m up to for anyone who’s interested… A few years back I was conversing with a co-worker and fellow guitar player. Aware I was an amateur woodworker, he suggested I build a guitar. “Luthiery requires special tools and skills…training. Naw, I couldn’t do that,” I said. Google search. Fast forward to la...
I’m making a small desktop humidor for my cigars. I don’t smoke often at all, but being a woodworker it was hard to resist making one.The purpose of a humidor is to keep cigars at the proper humidity (65-70%) and temperature (70deg). So I decided to make two at once. One for a friend and one for myself. Both cases are walnut. One has a cocobolo lid and the other a birdseye maple lid. Both will feature Brusso hinges. CONSTRUCTION:Dovetail joints for the sides. Lid and b...
As I sit here and wait for my walnut burl to arrive from UPS. ( My first internet order of lumber, I am a bit nervous.) I thought I would share a quick picture of my new box. I normally don’t share my projects when they are incomplete unless I am doing a blog or need a little advice on how to finish up a design. This time it is simply because I am so excited about it. This is my largest box to date. There is ruler in the picture to show scale. It is sized using the golden rectan...
I have officially made a clock! It ticks, it tocks, it dings and dongs. I can hear the chimes ringing as I write this update for you. Here’s what I’ve done to be able to call this an actual clock. I’ve added a support to the dado I cut in the sides. This one is for the dial door. You can see the dado for the mechanism support behind it. Here’s a head on shot of the mechanism support too. That all looked fine but I thought that adding a cross piece at the top ...
A quick tour of my recent cabinet project. I hope you enjoy!
Last night I started this blog. You can see Part 1 here: http://lumberjocks.com/davidroberts/blog/14843 I started with the footboard and almost screwed it up. I thought dousing it with stripper could melt the glue. I had been told that professional refinishers will sometimes not dip old pieces in fear the piece will fall apart. So I scrubbed with denatured alcohol and scraped and sanded for days. Then I got brave, bought a gallon of STRYPEEZE paint and varnish (and shellac) r...
It’s time to glue up the panels that are needed. I’m making a frame and panel as the back of the clock that will consist of 2 panels stacked on top of each other, held in place by the 3 horizontal rails and 2 vertical stiles. So I’ll need 2 panels for the back. Here’s one of those. Note the carpenter’s triangle that I use to keep the parts aligned. I have already glued the bottom two pieces together but we’ll walk through the rest of making this one. ...
I left off with the top being glued to some MDF risers. This morning I finish sanded it and put on two coats of lacquer. I will oil the walnut but I didn’t want to Maple any darker so I figured I’d lacquer it so when it’s all built up, the oil wont get into the maple top. Step 5: Finishing the Shelf I ripped the walnut border to length and laid it out to get an idea where to cut the biscuits. The center piece was a very clear piece of face grained walnut, so when I wen...
The other night my wife’s best friend’s daughter stopped by to help out with the kids while we ran some errands and completed some chores. She showed them a new game. They spent the evening in the basement hiding behind a blanket draped over a couple chairs, putting on puppet shows with the numerous dolls and stuff animals scattered about the basement. They’ve been putting on puppet shows nearly every day since…which sparked an idea for a Christmas present/project: ...
- My Journey As A Scroll Saw Pattern Designer - 1541 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 94 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1566 entries
- frank - 417 entries
- degoose - 394 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 268 entries
- William - 258 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- shipwright - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 188 entries
- Rustic - 186 entries
- Chris Davis - 183 entries
- BritBoxmaker - 181 entries
- Smitty_Cabinetshop - 170 entries