Here was an easy project that I did recently; a Hummingbird Feeder. You only need one board for this project and it’s something you can build in a few hours. Here is my attempt at making a video of how I made it, and as always you can check out my website at: www.woodlogger.com to see more projects and videos of what I’m doing in the shop.
I thought it’s time I filed a progress report on my attempt to carve a Bald Eagle. But first, let me apologize for not starting on the BE. You see, I’ve been looking at a couple of geese blanks sitting atop my fridge in my shop. Every time I wanted something out of the fridge, I could just hear these two geese honking at me to free them from the blocks of wood! So after a year of resisting, I finally got one down and started shaping and cutting on it, figuring that if I mess it up, at lea...
(music by Two Dark Birds, animation by JuliaPott) It took Fred Jakubiec from Birdhouseaccents 25 years before he made building birdhouses his full-time job. It was well worth the wait. After 13 years as Area Supervisor at various fast food establishments, a stint at a steel mill and years of driving for Fed Ex, Fred decided working for other people just wasn’t fun anymore.He and his partner Lynn Patrick regularly took trips to Amish country to go thrifting and flea market shopping. D...
After-Effects of Snow…. ....what can I add that these picture do not show-tell-speak forth them-selves….? I knew this one was coming so I had already closed the place up here on the outside, in regards to waiting on an icy breath of winters best. One must understand that it’s not the snow I have a problem dealing with, but the time spent on cleaning up after all the flakes of snow have had their party. So after having spent the day yesterday staying ahead of the storm,...
At the end of my last blog entry for this project, I had my pieces rough milled. Well, since then I have given the sides of the boxes its 30’ miter, and used my recently-tuned miter saw to cut the sides with nice clean miters. Once that was done, I needed to put the finger-hole for removing the lid onto the “front” of the box. To do this, I needed a 3/4” forstner bit, which has a nice flat bottom. To get the curve I needed, I needed to place the center of the bit 3/32&...
As you may have guessed, I make many of these tables. The practice is needed, and the combinations of woods make it very interesting. These were all made from the plexiglass templates shown. By using these templates, I can make these tops very quickly. I also have other shapes that are more complicated, which I’ll post at another time. Lee
Birds Eye Maple ....well just a short blog story today as I’m heading out soon to get my butt in high gear. I’ve been keeping busy around the shop lately with the many projects of woodworking as come my way, a counter top in process, some pieces, (actually three) of furniture and then there’s that three legged piece of maple that I have put up on the third floor of the barn-shop that has started whispering my name for attention. Why just yesterday there I was up on the...
- My Journey As A Creative Designer - Woodworking and Beyond - 1730 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 98 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 78 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1755 entries
- frank - 417 entries
- dbhost - 410 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 303 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 238 entries
- Betsy - 228 entries
- stefang - 213 entries
- Stevinmarin - 212 entries
- robscastle - 207 entries
- Todd A. Clippinger - 207 entries
- Dave Rutan - 206 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 193 entries
- Rustic - 190 entries