The Bible study I am a part of is having a party for Christmas. Each person is supposed to bring one gift, spending no more than $5.00. I saw this as a challenge. $5.00 isn’t much and I wanted to offer something of higher value. Lucky for me, my wife recently brought home some free pieces of wood. She works at an art gallery and they were getting rid of some random things. She saw some wood they had used as plaques that were going to be tossed. As she is industrious and thoughtful,...
In my last Blog post about Bare Essential Woodworking I described the basic overview of rough cost to get into this hobby for a future woodworker on a Low Budget. Using those steps you should be off to a good start. If you have bought something to cut and cut with you are probably starting to feel like this. Credit to Nick Offerman and his inspirational wood shop. I am going to skip by the Idea/Plan phase of a project. The inspiration for that was well described in the last post but ...
When I sit back and dream of all things woodworking this image is what I see. Credit to Nick Offerman’s Woodshop (If you haven’t checked it out you should. Very cool dude!!!):http://photos.vanityfair.com/2015/06/08/55761c49ca2dc24e4d26559d_nick-offerman-woodshop-ss19.jpg But my reality is:https://scontent-iad3-1.xx.fbcdn.net/hphotos-xft1/v/t1.0-9/11949487_1033562810009910_9120745669717242544_n.jpg?oh=7b17151b4d884f3db85bee18bfe24d00&oe=56A9E967 I’m sure you can see a...
Hello and welcome to my first Blog! The intent of this blog is to track my entrance into the world of woodworking. There seems to be a gap between the people who are just getting into woodworking, and those who have been enjoying the hobby for ten years. So, this is my attempt to fill some of that gap. You’ll get to watch me make mistakes, buy some bad tools, and hopefully you’ll learn from my mistakes. First off is my mission statement, the “why am I doing this?”...
I had it in mind for some time now to rig up something on which I could do some small wood turning. The photos above and below show the result of that. I have some bugs to work out yet with this set up. The drive end wobbles a bit under pressure while cutting. I’m thinking I could add some support to the shaft of the drive spur to help stabilize it. I also think I need a sharpening day. I just used my straight mortising chisels. They work after a fashion, but I think they...
I was 22 years old in 1976. I was in college to get a teaching degree and at the same time also attending the Maine school of Guitar making (luthiery). For the next few years I made guitars and sold them to college students. I finished about 20 of them. When I graduated from college I had to live out of state and after two years of that got married. Work and family took me away from the smell of brazilian rosewood and sitka spruce. Move ahead to 2008. I’m back in Maine at the old fam...
So today I decided to start blogging about my journey. Not so that anyone would actually read it, but mostly as a way for me to look back and see where I started, assuming I get some place with the whole thing. If you read this, you should know a few things about me first… One, I am a school counselor by trade, so I have NO formal training in anything with my hands. What I know about the mechanics of things honestly could be put in a children’s book written and illustrated b...
I’m finally setting up a shop in the east half of our two-car garage. I’ve got some rudimentary tools and even more rudimentary skills and a whole lot of enthusiasm and a very understanding Wife, so I bought a router to add to the 20+ year old fixed base B+D router I have. (I will have to write a review of the Triton 2 1/4 horse router when I’ve put it through its paces). Working on our dining room table a chair set that a buddy of mine was making for us I asked him abo...
So I’ve been a jock for a little less than a month and I find myself iching to check online and see what’s new. So here goes, before I start with my workbench blog, I’d like to give a little background on my wood experiences. As a 31 year old, I find myself a “young buck” in this discipline. I have always been a jack of all trades type, and there has been very little that I’ve tried. Growing up my father had a small shop in our basement where he would w...
I left off with a history of my woodworking and my future wood shop plans. As I had mentioned before I felt it was time to start my first workbench. The process of building the shop I had played around with some layouts for all the tools, storage, etc. I always wanted a big bench so I spent months looking at plans, pictures and writing notes on aspects that I wanted to include. I couldn’t afford a maple top and read that pine could be a cost effective option. So I started my design,...
- My Journey As A Creative Designer - Woodworking and Beyond - 1736 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 98 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 78 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1761 entries
- frank - 417 entries
- dbhost - 410 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 303 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 239 entries
- Betsy - 228 entries
- robscastle - 215 entries
- stefang - 214 entries
- Stevinmarin - 212 entries
- Dave Rutan - 209 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 193 entries
- Rustic - 190 entries