LumberJocks

Woodworking blog entries tagged with 'bean bag'

  • Advertise with us
View StephenSchaad's profile

Cornhole Board Tutorial #5: Finishing the boards

611 days ago by StephenSchaad | 6 comments »

This post will show you the way I finish the boards. I will not be painting these yet but I have included a link at the bottom for customization help. I just want to show you how to build the boards and prepare them for paint or stain. The first step in finishing the boards is flush trimming the plywood to the frame. If you don’t have a flush trim bit, you can just sand it down if it’s not too far off. I also like to adjust my flush bit to smooth out the inside of the hole....

Read this entry »


View StephenSchaad's profile

Cutting and Installing the leg slot

619 days ago by StephenSchaad | 0 comments »

Cut the last 4 foot piece three times. Cut two one foot legs first, then measure and cut the top piece. It should be about 22.5” or so. Put the legs in the leg slot. Make sure to leave enough room for the legs to slide in and out even after they are painted. Predrill, countersink and screw two screws per side. These are the legs. I find that it’s best to simply sand down the edges instead of using a round over router bit. I’ll cover sanding and routing i...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase