Hey everyone! the name of the show is called Filthy Riches and we premier April 20th!here is the link so you can see the trailer: Filthy Riches
Yes I did use a pattern gotten out of one of the recent ScrollSaw Magazines. Made 2 copies of overall pattern, one to use as a guide when placing the cut pieces together and keeping them in order, the other to make numerous copies on my home printer to attach to the selected woods by using clear shelf paper with glue on one side found at Home Depot. These then are cut out to match any adjoining piece and placed on my master copy. Once completed with cut outs, creat the different depths you...
Assembling Rows Four to Seven Adding rows 4 to 7 follows the same procedure as described in the previous section: The photo below shows the fourth row glued together and ready for bending. Notice again that the grain on these petals runs crosswise in order to create a soft curve when the row is bent and glued into a cone. Here is the result after the centre rows have been inserted. Remember to use the “centre guide” (see previous entry) to keep things aligned. ...
Step Four – Assemble the Centre Petals I prepare the petals by soaking them in water for a few minutes to make them pliable. I set a few petals on tissue to absorb excess water before gluing. I use cyanoacrylate adhesive because it is fast setting. Moisture helps to speed up the curing process. This makes it the ideal adhesive for this project. I also keep a can of acetone and several cotton swabs handy for those inevitable times when my fingers become part of a flower!...
Step Three – Cut out the Flower Petals If you wish to make a rose like the ones in my spring bouquet, you will need 28 flower petals for each rose. You can eliminate one or two rows but the result is less impressive in my opinion. The petals are arranged in layers or tiers when the flower is assembled. It helps to cut out a template from stiff paper or card stock. Use a soft pencil to trace the shape onto the basswood shavings. A sharp pair of scissors will do the job of c...
Step Two – Flatten the Shavings The shavings need to be flat so they are usable for flower making. This is easily done by soaking the shavings in a container of water for ten minutes or more. The shavings will still be curled but running a hot iron on the shaving as it is unrolled will evaporate the water and leave a flattened strip of paper-like wood. Please don’t use the iron that you use for ironing clothes and other fabrics! The process described here is not kind to the iron as y...
Some people have asked me how I make wooden flowers like the ones in my spring bouquet. I hope that this tutorial helps those of you who want to make your own flowers. I’ll try to add to the blog as time permits and when I have something that I feel might be useful to add. Your comments are appreciated! Ron —————————————————————————&...
CLICK HERE for over 80 patterns & 80+ full length HD chip carving lessons.Thanks for watching!
Here is the process I used to attach the carved turkey foot to a bark-on shaft. I am not sure what type of wood the shaft is, but I selected it for the interesting bark it has. I have used this type before and the bark stays attached and has interesting colors and textures. The trick is to make a nice transition between it and the carving, trying to make it flow, nut just a carving stuck on top of a stick. I used wooden dowels and Titebond glue to join the carving to the stick. After the glue...
I’m working on a cane for my son-in-law’s father. He’s a fanatical turkey hunter and this is a surprise for his birthday in March. John provided a turkey foot as a model for me and I took pictures and enlarged them to get the foot to a size that would be usable as a cane handle. I also modified one of the claws to prevent having a piece sticking out that might get broken. I have a glue joint fight below that toe, so I have the grain of the wood running properly for strength....
- My Journey As A Creative Designer - Woodworking and Beyond - 1823 parts
- Extremely Average - 324 parts
- Toy costruction - 131 parts
- A journey into the workshop. - 115 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Woodworking on a Half-Shoestring - 91 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 82 parts
- Shop stuff - 81 parts
- Sheila Landry (scrollgirl) - 1848 entries
- dbhost - 449 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- mafe - 324 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- Dave Rutan - 273 entries
- William - 258 entries
- robscastle - 256 entries
- shipwright - 255 entries
- Betsy - 228 entries
- A Slice of Wood Workshop - 226 entries
- bandit571 - 224 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries