LumberJocks

Woodworking blog entries tagged with 'barley twist'

  • Advertise with us
View Ron Aylor's profile

• Fr. Chad's Prie Dieu #7: The Right Color

09-24-2017 06:17 PM by Ron Aylor | 2 comments »

The Right Color –  Wanting to capture the color of the altar table in the Harvard Chapel of Southwark Cathedral, London, I decided (after a bit of trial and error)  on a concoction of 4 ounces of General Finishes Medium Brown Dye/Stain (straight out of the can)  diluted with 1-1/2 ounces of water.   I covered the cocobolo butterflies with tape and slathered on a quick coat, letting it sit for about ten minutes before soaking up the residue with a paper towel. I let this dry for about 30...

Read this entry »


View Ron Aylor's profile

• Fr. Chad's Prie Dieu #6: Gadrooning

09-07-2017 11:15 PM by Ron Aylor | 8 comments »

Gadrooning –  For the gadrooning, I decided on a barley-ribbon twist  pattern. Given that the kneeling platform is just slightly wider than it is deep, mitering the gadrooned trim pieces proved difficult at best.   So, I decided to create corner blocks to match each corner of the platform … that way the trim pieces could simply butt up to the corners.  With the corner blocks fitted to their respective corners … I alleviated the need for perfect squareness. Is that cheating...

Read this entry »


View Ron Aylor's profile

• Fr. Chad's Prie Dieu #5: Butterflies & Trim

09-03-2017 07:46 PM by Ron Aylor | 7 comments »

Butterflies & Trim –  Once the secret drawer was fitted and working properly, I glued up three walnut boards to form the top of the kneeling platform. Once the glue dried and the top was squared, I attached it to the frame with seven 3/4” x 3/4” glue blocks.  Once that  glue dried I decided to add butterflies to re-enforce the rub joint.  I used 3/16” thick cocobolo for the three 1” x 3” butterflies.                 Next up I planed and card scraped a walnut board for th...

Read this entry »


View Ron Aylor's profile

• Fr. Chad's Prie Dieu #4: The Kneeling Platform

08-27-2017 09:18 PM by Ron Aylor | 4 comments »

The Kneeling Platform –  With the barley twist split spindle completed and resting quietly out of harms ways, I start work on the kneeling platform.  Now … what Elizabethan/Louis XIII style Prie Dieu would be complete without a secret compartment? Besides, where else would a Reformation Era priest have kept those controversial texts? After a great deal of thought and working out countless possibilities in my head; I decided on a secret draw patterned after that of Marc Spagnuolo&#...

Read this entry »


View Ron Aylor's profile

• Fr. Chad's Prie Dieu #3: Barley Twist Split Spindle

08-20-2017 05:18 PM by Ron Aylor | 6 comments »

Barley Twist Split Spindle - With most woodworking projects, especially hand tool projects, consistency is a challenge in and of itself. The mirror image barley twist proved no exception. After several hours in the file box, back and forth with chisel, rasp, and file, I feel like perhaps I achieved the proverbial close enough!  Although slightly off in spots, I think the mirror image accent pieces will turn out just fine.  At least … I’m happy with the results! Also, I do believe ...

Read this entry »


View Ron Aylor's profile

• Fr. Chad's Prie Dieu #2: To the File Box!

08-13-2017 07:10 PM by Ron Aylor | 15 comments »

To the File Box! –  Having formed the beads and flats at both ends and roughed out the cylinder for the barley twist … it was time to disconnect from the lathe and split the spindle.  With just a few whacks of a chisel the spindle split nicely along the brown paper seam.               Voilà … time to get the file box!  My file box is nothing more than a hand powered lathe of sorts. Fixed head stock at one end … movable tail stock at the other.  The centers are actually...

Read this entry »


View Ron Aylor's profile

• Fr. Chad's Prie Dieu #1: An Ambitious Endeavor

08-07-2017 11:02 AM by Ron Aylor | 10 comments »

An Ambitious Endeavor –  As you may recall I set out two years ago to build Prie Dieux for the four priests at St. Bede’s Episcopal Church in Tucker, Georgia. This fourth Prie Dieu in the series, being built for the Rector of St. Bede’s, may very well prove to be my most ambitious hand tool endeavor to date. I will be attempting a Louis XIII/Elizabethan-ish  style Prie Dieu in walnut and Ambrosia maple. There will be some firsts for me with this project, like the gadrooning,...

Read this entry »


View bearkatwood's profile

Shop Remodel #36: sexy legs!!

01-19-2016 02:00 AM by bearkatwood | 10 comments »

My legs have curves!! I got all four legs turned today. The leg with the vise is a tricky one. I wanted it to still have the barley twist so I turned it and then routed out a chunk. I filled that routed out section with wood and then I will rout that out again to accommodate the leg vise hardware. First I turn the legs round using my mill and a two inch flat bottom bit. Then I swith over to the two inch barley twist bit. The mill has a complex set of gears that...

Read this entry »


View Les Hastings's profile

Open barley twist newel posts

01-25-2011 03:59 AM by Les Hastings | 9 comments »

These are some newel posts that I made for a local contractor recently. They are made out of Knotty Alder and are 7” x 7” square. The barley twists are done on the legacy ornamental mill. The column caps were hand turned with a tenon and applied.

Read this entry »


View John Fry's profile

A walnut sofa table with Jacobean influences

04-30-2008 03:36 AM by John Fry | 17 comments »

First I want to thank everyone who visited and responded to my last two project blogs; A small table that took a whole lot of work A veneering extravaganza! As always I welcome your comments AND critiques on this latest project. This commissioned sofa table’s concept was borrowed from a late seventeenth century round gate-leg table. The client wanted it in a dark walnut with “antique shading”, and asked that the back of the table be as detailed as the front so it could be u...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com