when the slices come of from the log, the bark is being cut of in the process of edging. The bark is not in a straight line however on the lsice so for optimized output (as many boards from a log) this process is very important and should only be done by expereinced employees. They more or less calculate what kind of boards may come out (1×6” wide and 1×4” wide or 1×6” wide and 1×3” wide) and production is either good or with a poor yield. This edgi...
Hello !I’ll be cutting down my 25 year old Wisteria real soon and I’m not really sure what the best way to dry it before using it. In the garage, outside under my covered shed or in the basement in the heating room? There is a lot of wood for several walking sticks and the main trunk is approximately 4ft long and 5” to 6a” thick. Should I take the bark off before drying or after ? I hope someone ca help me. Thank you, Ken
well I’m going to tell ya ll about a special friend…been with me from the beginning and i assume to the end…my friend can be loud and can leave a blue cloud and words that seem to be part a of a dream,my friend is intimate most of the time its always stripping and in public thats a crime so i think we should just take off the vail…and see my friend the one who can whail…...ahhhh yes my planner..the head dude in the shop..hes taken ugly wood and made it so when y...
Just a quick note. I found some logs (again!) and quickly sliced up a half log for the turning. It had some loose bark I tore off, but also some seemingly strongly-affixed pieces that I decided to leave on. Too hard to remove. I was only at around 1000RPM (2nd out of about 6 speed settings on my Jet 12×20), when wHaCk! A piece of heavy, hard bark about 3”x5”, and around 3/16” thick smacked me really hard in the face. I was wearing a polycarbonate full-face shield fro...
Ancientwood has developed a technique for filling large, structural cracks, sometimes found in Ancient Kauri slabs. This is a step-by-step approach for creating a flat surface with beautiful patterns and design. 1. The slab must first be flattened. This can be done with a drum sander, planer or a CNC router.2. After the slab is flat, locate cracks that need filling.3. Fill any hairline cracks with color-matched latex putty. Wet the adjacent area of the Ancient Kauri with spirits to get an a...
Stone and Wood ....study deep and go within, for in these inwards of stone and wood, beats the heart of my love’s in-flame, where naught but wight’s such as i can go for peace-full respite…. —-sing forth the study of my soul, i go a caroling within the depths of these here woods, while none there is that crosses my path as fair weathered fiend, but the arrow that flees to it’s point of yonder destiny…. —-why sitting here just now in mornings ...
Been Workin’ at Wood ....and so I have,and so I yet will be,and so I just can’t get enough,of that thing called workin’ wood! Well just some photos here of what’s going on around here at the moment, as I’m preparing for the best of winter. One of the opportunities that is presented to me up here, as I go through the seasons, is the ongoing adjustment to the need of change. And so I have been busy, and then more then a little busy at getting wood in and spli...
Live in the woods….Wood Art Well here we go….while out last Saturday working in the woods, I happened to be down in a place that does not get into my normal forest travels. I was down in this area last fall cutting trees for this winter’s burning and happened to be down here not long ago looking at some trees that had recently fallen, due to storm winds. Last Saturday was spent cleaning those trees up and while on a break that morning, I decided to waunder around. Foun...
Folk-Wood-Tales ....deserted and hard pressed, peeled back from weathered exposure, i often think back to younger days, when those that passed me by gave thanks…. —-my scar is deep that runs within my trunk, and this i received at the hands of an-other, scars and wounds are but battle purging follies, while i am left to bear a showing of what re-mains…. —-tis better that i bear my pain of shame, in the silence of these forgotten woods, since when will come tho...
Wood Bench, Wood Joinery and Lookin’ for Bear After finishing up with cutting some logs yesterday and then clearing brush with my wife, I still felt the need to get some relaxation by doing some trail ridding. So after asking my wife if she wanted to come along, which is really a no-brainer since she’s all-ways ready for the woods….it was off on the atv. ....and so we ended up here at this spot which sets at one of the high points of our land, in what we refer to as out i...
- My Journey As A Creative Designer - Woodworking and Beyond - 1793 parts
- Extremely Average - 324 parts
- Toy costruction - 116 parts
- A journey into the workshop. - 110 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Daily Update - 87 parts
- Woodworking on a Half-Shoestring - 82 parts
- Life as an Amateur Woodworker - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Sheila Landry (scrollgirl) - 1818 entries
- dbhost - 436 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- mafe - 313 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 242 entries
- Dave Rutan - 231 entries
- Betsy - 228 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- A Slice of Wood Workshop - 211 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 195 entries