In this Episode:the conclusion of Matt’s router Bowl
Quartersawn oak blanks are cut to 14” long and 1 5/8” thick. The upper crest rails are 3” wide and the lower rails are 2 ½” wide. I chose to construct the chair with floating tenons so that I could mill and cut all of the rails to the exact same length. A bench-top mortising machine is used to make the mortises for the upper and lower crest rails. The 3/8” chisel is set exactly parallel to the machine’s fence, then an auxiliary fence is installed and shimmed to the proper angle required. Sto...
For the first part of the project, you must ask yourself, “What size is the box going to be?” If you aren’t sure, just take a couple 2×4’s and glue them together, or get a chunk of a cedar 4×4, they work good, and smell nice when they are cut up. You can get as elaborate as you want later on, but for starters keep things simple to manage. The project must be made from a solid piece of wood or several pieces glued together to become solid. By laminating ...
For the horizontal tail pieces, I laid all 5 of them out on a larger 1/4” x 5” by 24” piece of poplar. I did a rough cut using the band saw with the intent of finishing them on my sander. DON’T DO THIS: I cut the 5 vertical pieces the same way, using another 1/4” x 4” by 24” piece, consuming one of the 10 pieces I’d originally purchased. I thought I just needed 10 of the 1/4” x 4” pieces, to get the 2 wings per plane. After I started cutting the vertical tail pieces I guessed that I’...
As I have been away at college, this is the first chance I’ve had to organize and set up the new shop. So, here are several shop projects completed over the past few days. First up, the clamp rack. As all of us are aware, we couldn’t be woodworkers without several clamps. The problem is in finding the best way for each of us to organize them. Here is my version: Next is just an organizational item made out of a re-purposed kitchen cabinet. Just a place...
Well if you have made it this far, why not go a little further and watch the conclusion of this chest. It has been a fun build so far for me. I hope it has been informative and somewhat enjoyable for you to watch as well. Now I know the video quality isnt the best. but As I go on it has gotten better….Now in this present day I have a new camera, lighting and it has helped a lot. Here are the final 3 videos of this chest build. Parts 6, 7, 8 Part 8 was pretty basic, the installation ...
The 6th video in a series about building a Allan Little designed Ultimate work table with a multifunctional top. In this video I install the drawer runners to the work table. http://www.youtube.com/watch?v=b5peifOXoUY&feature=share&list=PLMP5Q4_HkvdmzWZaaScIppWxyBrl8gqKP
I’ve been working for a few weeks now, a few hours a night getting the side-table built. It wasn’t that difficult to do. But it was fun nonetheless. Assembling the base of the table. The legs go on with glue and screws from the back. The most difficult part of the whole assembly was getting the spacing correct. The plans called for a distance of 18 1/4”. So it was a matter of getting the 2 ends of the top to run parallel at 18 1/4” while maintaining th...
I took some new pictures of my shop. (More on my site) They are all in the shop section on my blog. The old ones were taken with my cell phone, so the quality was not the best. Still working out a few things with my blog (trying to get some things with Google search worked out). I’m having trouble getting this site to show up in Google search. Hope to get this stuff worked out soon. If anyone can help it would be grately appreaciated. Also, I have been editing away, I have taped a...
Once the mortises were complete, it was time to finally move on to the stepped pattern. I first roughed out the pattern at the band saw so as to remove the majority of the waste. After the problems I ran into while building a pair of cradles I now know I need to get to within 1/16” of the line I’ll eventually template route to. I’m currently borrowing my neighbors bench-top bandsaw which has a slightly dull blade and doesn’t always cut perfectly straight so I...
- My Journey As A Scroll Saw Pattern Designer - 1189 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 87 parts
- Daily Update - 87 parts
- Just for Fun... - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- As The Lathe Turns - 67 parts
- Workshop Development - 65 parts
- Sheila Landry (scrollgirl) - 1211 entries
- frank - 417 entries
- degoose - 388 entries
- dbhost - 331 entries
- Ecocandle - 325 entries
- MsDebbieP - 300 entries
- Martin Sojka - 297 entries
- Karson - 293 entries
- William - 249 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- mafe - 206 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 187 entries
- Chris Davis - 183 entries
- Rustic - 183 entries
- PurpLev - 162 entries
- shipwright - 160 entries
- BritBoxmaker - 159 entries
- stefang - 145 entries