I’ve had several LJ’s request pics of the jig I made for the wavy Larry board. I’ve snapped a few pics and sent PM’s with bits and pieces of info individually. Mikethetermite asked for some info a few days ago and I decided to bit the bullet and take the time to do it as a blog. Here goes- On my band saw table I have a sacrificial board- 3/4” plywood squared and framed to the table. The back frame piece unscrews and swings up to put the board on and off the ta...
I decided it was high time I quit clamping a piece of wood to my bandsaw table whenever I needed a fence, and upgraded to something more easily adjustable. Based on a design for a drill press fence in a recent Woodsmith Small Shops book, I came up with this cleat style fence. I used 2×4’s for the front and back rails, putting the 45 degree angle on them with my table saw. I bolted them to the existing threads on my bandsaw’s fence. The fence is a piece of cherry, and t...
I got 2 1” Timberwolf blades from Suffolk Machinery Corp. – 2TPI and 3TI – several months ago, and have been dying to try them out ever since. In that time I had several more projects, mom’s 10-day long yearly visit, my best friends’ wedding, a project I built for that (that I should post one of these days), and so much else. I didn’t want to use them until I had a resawing jig ready to go, so realizing that time was now, I jumped on it yesterday, later in ...
I’m in the middle of constructing the famous Thien Separator and I needed to build a circle cutting jig to use on my band saw.I decided to make a video of it (my very first one) to share with you.You can view it here on YouTube.Hope you enjoy it.
This adjustable bandsaw sled works on the same principle as a taper sled for a table saw. I initially designed it for quick and accurate repetitive cuts on the toy racer shown below, but it works great for any kind of angled cuts on the bandsaw. I believe it will also work well for shorter tapered legs, although I haven’t tried it for that yet. The body of the sled is 3/4” MDF, and the fence and stop are made from scraps of Phenolic-faced plywood. The anchor bolt for the...
I’ve been keeping my eye on WoodGears for a while now. I’d love to build all of his contraptions, but don’t have the time or the space at the moment. I’ve been wanting to build his bandsaw for some time now, and finally took the plunge. Plus I just got my tax refund back, and instead of buying an expensive bandsaw (a tool I currently do not own), why not just make one? I will try and keep the blog current and take as many pictures as I can. Hopefully most of the p...
continuing on this project, i have already made the wheels out of used HDF materials from the doors of a broken cabinet. I fashioned out a quick jig for cutting the wheels on my table saw. the simple jig on my table saw made of 1/4” playwood. .I made 4 wheels and cut away the inner circles of the two and attached them on the remaining wheels with glue and screws. .and tested them on the frame. .I have also made the crowns on the wheels using the same jig on my table saw. But...
I must apologize for my lack of interaction here on LumberJocks. I am on the night shift at the paper mill and my neighbors don’t dig the 2:30 am woodworking bit, so I have been limited to my keychain work and ya’ll have seen that. It is my night off and I remembered a couple requests a while back to do a blog on my keychain process. So, here ‘tis! I hope the video comes out right. I’ve been experimenting with my CoolPix. Short videos? I can do that! So I decided to...
It another work week and I’m sure you all could use a smile. So here is a simlpe circle jig you can make. Plus check out the differnt ending to this video.
I should preface this blog with a note about myself. I recently shed most of my power tools in favor of old hand tools, like Stanley Planes, Disston saws, and old Braces/Bits and eggbeater drills. This was around December of 2014 (about 9 months ago as of this writing). The two power tools I decided to keep in the shop were a band saw and a drill press. Problem was, I didn’t own a band saw (at least not a decent one). So the search began. I hemmed and hawed about it, researched, a...
- My Journey As A Creative Designer - Woodworking and Beyond - 1815 parts
- Extremely Average - 324 parts
- Toy costruction - 130 parts
- A journey into the workshop. - 115 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Woodworking on a Half-Shoestring - 91 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 82 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Sheila Landry (scrollgirl) - 1840 entries
- dbhost - 448 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- mafe - 322 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- Dave Rutan - 265 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 253 entries
- Betsy - 228 entries
- A Slice of Wood Workshop - 222 entries
- stefang - 221 entries
- bandit571 - 213 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries